{"id":1658,"date":"2026-05-15T16:33:20","date_gmt":"2026-05-15T08:33:20","guid":{"rendered":"https:\/\/wellspcba.com\/?p=1658"},"modified":"2026-05-15T16:33:22","modified_gmt":"2026-05-15T08:33:22","slug":"coupon-test-station-in-pcb","status":"publish","type":"post","link":"https:\/\/wellspcba.com\/fr\/coupon-test-station-in-pcb\/","title":{"rendered":"What Is a Coupon Test Station in PCB? A Complete Guide to Test Coupons, Types, and Quality Standards"},"content":{"rendered":"<p>A <strong>coupon test station in PCB<\/strong> manufacturing is a dedicated setup within a fabrication facility where non-functional board sections \u2014 called test coupons \u2014 are evaluated using precision instruments to verify that the manufacturing process has met specified electrical, mechanical, and reliability requirements. It is the point in the production workflow where objective, quantifiable data replaces assumption.<\/p>\n\n\n\n<p>Every PCB that leaves a professional factory without coupon testing has been shipped on the assumption that the process was correct. Coupon testing replaces that assumption with measured evidence \u2014 before a single board enters assembly. To understand where coupon testing fits within the full production sequence, see the <a href=\"https:\/\/wellspcba.com\/fr\/pcba-manufacturing-process\/\" target=\"_blank\" rel=\"noreferrer noopener\">PCBA manufacturing process<\/a> guide.<\/p>\n\n\n<h2>What You Need to Know at a Glance<\/h2>\n\n\n<ul class=\"wp-block-list\">\n<li>A <strong>PCB test coupon<\/strong> is a non-functional section fabricated on the same panel as production boards, using identical materials and processes<\/li>\n\n\n\n<li>A <strong>coupon test station<\/strong> is the factory setup \u2014 instruments, fixtures, and procedures \u2014 used to evaluate those coupons<\/li>\n\n\n\n<li>Test coupons verify impedance, via integrity, plating thickness, lamination quality, and solderability without touching or damaging the finished product boards<\/li>\n\n\n\n<li>The most commonly used coupon types are <strong>A\/B, D, and Type Z (impedance)<\/strong>, standardized under IPC-2221 and IPC-TM-650<\/li>\n\n\n\n<li>Coupon testing is mandatory for IPC Class 3 boards and strongly recommended for any high-speed, HDI, or controlled-impedance design<\/li>\n\n\n\n<li>Wells Electronics equips every advanced PCB production panel with appropriate test coupons as a standard quality control measure<\/li>\n<\/ul>\n\n\n<h2>Understanding the Basics: PCB Test Coupon vs. Coupon Test Station<\/h2>\n\n\n<p>Before examining how these systems work, it is worth separating two related concepts that are often conflated.<\/p>\n\n\n\n<p>A <strong>PCB test coupon<\/strong> is a physical object \u2014 a small, pattern-dense section of the manufacturing panel that mirrors the critical structures of the production boards: trace geometries, via configurations, layer stack-up, copper weights, and surface finishes. It contains no functional circuitry, no components, and no ICs. It exists exclusively as a testing proxy for the batch of boards it was built alongside.<\/p>\n\n\n\n<p>A <strong>coupon test station<\/strong> is a physical location and instrument setup within the PCB factory where these coupons are evaluated. It typically comprises a Time Domain Reflectometer (TDR) for impedance measurement, a microsectioning workstation (mounting press, grinding station, and metallurgical microscope) for cross-section analysis, a thermal stress chamber for interconnect reliability testing, and associated fixturing, probes, and data-logging systems.<\/p>\n\n\n\n<p>The relationship is simple: the coupon is the sample; the coupon test station is the laboratory that analyses it.<\/p>\n\n\n\n<blockquote class=\"wp-block-quote is-layout-flow wp-block-quote-is-layout-flow\">\n<p><strong>Why this distinction matters to OEMs:<\/strong> When qualifying a PCB manufacturer, asking &#8220;do you use test coupons?&#8221; is the wrong question. The right questions are: &#8220;What is the layout of your coupon test station?&#8221; and &#8220;What test methods do you run, to which IPC standards, and can you provide a report?&#8221; A factory that owns coupons but lacks a calibrated TDR and documented test procedures is not providing meaningful quality verification. If you are new to the full scope of <a href=\"https:\/\/wellspcba.com\/fr\/what-is-pcba-manufacturing\/\" target=\"_blank\" rel=\"noreferrer noopener\">what PCBA manufacturing involves<\/a>, that guide provides useful background before diving into coupon testing specifics.<\/p>\n<\/blockquote>\n\n\n<h2>Why Coupon Testing Exists: The Core Problem It Solves<\/h2>\n\n<h3>The Invisibility Problem in PCB Fabrication<\/h3>\n\n\n<p>The most consequential quality parameters in a multilayer PCB cannot be verified by visual inspection or AOI alone. The copper plating thickness inside a 0.2mm via barrel, the dielectric thickness between layers three and four, the impedance of a 50\u03a9 stripline buried in the inner layers \u2014 none of these are observable from the board surface. They can only be verified by either destroying the finished product or measuring an identical test structure built under the same conditions.<\/p>\n\n\n\n<p>Test coupons solve this problem elegantly. Because the coupon is fabricated on the same panel, passing through the same plating tanks, lamination press, and etching lines as the production boards, its measured properties are directly representative of the entire batch. The coupon is then sacrificed for testing so the product boards do not have to be.<\/p>\n\n\n<h3>What Happens Without Coupon Testing<\/h3>\n\n\n<p>For a high-speed digital board requiring a 100\u03a9 differential impedance on DDR5 memory traces, a \u00b110% manufacturing tolerance means the acceptable window is 90\u2013110\u03a9. Without impedance coupon testing and a TDR measurement report, the fabricator has no way to confirm \u2014 and the OEM has no way to verify \u2014 that the boards shipped meet this requirement. The failure mode is insidious: boards may pass visual inspection, AOI, and even in-circuit electrical test, but exhibit signal integrity failures at system speed due to impedance mismatch. These failures typically surface during system integration, months after the boards were built, at a point where root-cause analysis is expensive and corrective action requires a full fabrication re-run.<\/p>\n\n\n\n<p>This is why IPC-6012 \u2014 the qualification and performance specification for rigid printed boards \u2014 mandates coupon testing as part of Class 2 and Class 3 acceptance criteria, and why it is standard practice at any factory serving high-reliability markets. (<a href=\"https:\/\/www.ipc.org\/ipc-6012\" target=\"_blank\" rel=\"noopener\">IPC International<\/a>) For a detailed look at the specific defects that coupon testing is designed to catch before they reach assembly, see the <a href=\"https:\/\/wellspcba.com\/fr\/pcb-soldering-defects-guide\/\">PCB soldering defects guide<\/a>.<\/p>\n\n\n<h2>Anatomy of a PCB Test Coupon: What It Looks Like and What It Contains<\/h2>\n\n\n<p>A test coupon is visually identifiable on the manufacturing panel by its characteristic appearance: a compact, rectangular strip densely packed with structured patterns \u2014 via chains, controlled-width traces, pad arrays, and measurement access points \u2014 with none of the functional complexity of the product board.<\/p>\n\n\n\n<p>Typical structural elements within a test coupon include:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Via chains<\/strong> (daisy-chained through all layers) \u2014 for resistance measurement and cross-section analysis<\/li>\n\n\n\n<li><strong>Controlled impedance traces<\/strong> (single-ended and\/or differential pairs) \u2014 for TDR measurement<\/li>\n\n\n\n<li><strong>Component holes and blind\/buried via structures<\/strong> \u2014 for plating reliability evaluation<\/li>\n\n\n\n<li><strong>Solder mask windows and coverage areas<\/strong> \u2014 for adhesion and registration testing<\/li>\n\n\n\n<li><strong>Bare laminate areas<\/strong> \u2014 for surface insulation resistance (SIR) evaluation<\/li>\n\n\n\n<li><strong>Measurement pads<\/strong> \u2014 access points for instrument probes, sized and spaced to match the TDR probe fixture geometry<\/li>\n<\/ul>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"682\" data-src=\"https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-location-manufacturing-panel-edge-1024x682.webp\" alt=\"PCB manufacturing panel showing test coupon strip on the panel edge alongside production boards \u2014 IPC-2221 standard coupon placement\" class=\"wp-image-1660 lazyload\" data-srcset=\"https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-location-manufacturing-panel-edge-1024x682.webp 1024w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-location-manufacturing-panel-edge-300x200.webp 300w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-location-manufacturing-panel-edge-768x511.webp 768w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-location-manufacturing-panel-edge-18x12.webp 18w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-location-manufacturing-panel-edge.webp 1537w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" src=\"data:image\/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==\" style=\"--smush-placeholder-width: 1024px; --smush-placeholder-aspect-ratio: 1024\/682;\" \/><\/figure>\n\n\n\n<p>In multilayer PCBs, the via chains traverse every layer, allowing the cross-section analysis to inspect plating continuity, annular ring integrity, and dielectric consistency from the top copper layer to the bottom. For HDI boards with blind and buried vias, the coupon typically contains separate daisy-chains for each via type so they can be evaluated independently.<\/p>\n\n\n<h2>The 6 Core Types of PCB Test Coupons<\/h2>\n\n\n<p>The IPC-2221B standard defines the specification for PCB test coupons across multiple categories. The most commonly specified types in professional PCB manufacturing are:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Coupon Type<\/th><th>IPC Designation<\/th><th>What It Tests<\/th><th>Primary Test Method<\/th><\/tr><\/thead><tbody><tr><td><strong>A\/B Coupon<\/strong><\/td><td>IPC-2221 A\/B<\/td><td>Via integrity, plating quality, component holes, rework simulation<\/td><td>Microsection analysis (IPC-TM-650 2.1.1)<\/td><\/tr><tr><td><strong>D Coupon<\/strong><\/td><td>IPC-2221 D<\/td><td>Via\/plating reliability under thermal stress, interconnect resistance<\/td><td>4-wire resistance monitoring during IST\/thermal cycling (IPC-TM-650 2.6.7.2)<\/td><\/tr><tr><td><strong>Type Z \/ Impedance Coupon<\/strong><\/td><td>IPC-2141A<\/td><td>Controlled impedance of single-ended and differential traces<\/td><td>TDR measurement (IPC-TM-650 2.5.5.7)<\/td><\/tr><tr><td><strong>H Coupon<\/strong><\/td><td>IPC-2221 H<\/td><td>Surface insulation resistance (SIR) under humidity\/voltage bias<\/td><td>SIR testing<\/td><\/tr><tr><td><strong>S Coupon<\/strong><\/td><td>IPC-2221 S<\/td><td>Solderability of surface finish<\/td><td>Solder float \/ dip testing<\/td><\/tr><tr><td><strong>P Coupon<\/strong><\/td><td>IPC-2221 P<\/td><td>Peel strength of outer layer copper foil<\/td><td>Mechanical peel test<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"538\" data-src=\"https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-types-comparison-infographic-wells-electronics-1024x538.webp\" alt=\"6 types of PCB test coupons comparison chart \u2014 A\/B, D, Type Z, H, S and P coupons with IPC designations and test methods by Wells Electronics\" class=\"wp-image-1663 lazyload\" data-srcset=\"https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-types-comparison-infographic-wells-electronics-1024x538.webp 1024w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-types-comparison-infographic-wells-electronics-300x158.webp 300w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-types-comparison-infographic-wells-electronics-768x404.webp 768w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-types-comparison-infographic-wells-electronics-1536x807.webp 1536w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-types-comparison-infographic-wells-electronics-18x9.webp 18w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-types-comparison-infographic-wells-electronics.webp 1730w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" src=\"data:image\/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==\" style=\"--smush-placeholder-width: 1024px; --smush-placeholder-aspect-ratio: 1024\/538;\" \/><\/figure>\n\n\n<h2>A\/B Coupon \u2014 The Microsection Workhorse<\/h2>\n\n\n<p>The A\/B coupon is the primary tool for evaluating the internal quality of a multilayer PCB. It is designed to accommodate both through-hole and via structures and is tested primarily through microsectioning \u2014 the process of cutting, mounting, grinding, polishing, and photographically documenting a cross-sectional view of the coupon.<\/p>\n\n\n\n<p>The outer row (Coupon A) is typically used for rework simulation: it undergoes multiple solder reflow cycles to assess how component holes withstand thermal stress during assembly and repair operations. The inner row (Coupon B) evaluates the integrity of via structures under the same thermal exposure.<\/p>\n\n\n\n<p>Acceptance criteria are defined per IPC-A-600 and IPC-6012: plated through-hole copper thickness must be \u226525\u00b5m for Class 3, annular rings must meet minimum width requirements, and no cracks, voids, or delamination may be present in the barrel wall.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"768\" data-src=\"https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-microsection-cross-section-pth-barrel-1024x768.webp\" alt=\"PCB cross-section microsection analysis showing plated through-hole copper barrel thickness and multilayer stack-up \u2014 A\/B coupon IPC-TM-650 evaluation at Wells Electronics\" class=\"wp-image-1661 lazyload\" data-srcset=\"https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-microsection-cross-section-pth-barrel-1024x768.webp 1024w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-microsection-cross-section-pth-barrel-300x225.webp 300w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-microsection-cross-section-pth-barrel-768x576.webp 768w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-microsection-cross-section-pth-barrel-16x12.webp 16w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-test-coupon-microsection-cross-section-pth-barrel.webp 1448w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" src=\"data:image\/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==\" style=\"--smush-placeholder-width: 1024px; --smush-placeholder-aspect-ratio: 1024\/768;\" \/><\/figure>\n\n\n<h3>D Coupon \u2014 The Reliability Monitor<\/h3>\n\n\n<p>The D coupon is designed specifically to evaluate interconnect reliability under thermal stress \u2014 the simulation of the thermal cycling a PCB will experience during assembly reflow and in-field operation. Its via structures are arranged in a daisy-chain formation, allowing continuous 4-wire resistance measurement throughout a thermal stress profile.<\/p>\n\n\n\n<p>The test typically applies between 100 and 1,000 thermal cycles (per IPC-TM-650 method 2.6.7.2), with the high temperature set at Tg\u221210\u00b0C or reflow peak\u221225\u00b0C (whichever is lower), and the low temperature at \u221255\u00b0C. The acceptance criterion per IPC-TM-650 is less than 5% change in resistance across the full thermal cycling sequence. (<a href=\"https:\/\/orslabs.com\/services\/pcb-testing\/ipc-tm-650-a-b-and-d-coupon-testing\/\" target=\"_blank\" rel=\"noreferrer noopener\">Oneida Research Services \u2014 IPC-TM-650 Coupon Testing<\/a>)<\/p>\n\n\n\n<p>This test is particularly critical for lead-free assemblies, where higher reflow temperatures (peak 260\u00b0C vs. 183\u00b0C for eutectic SnPb) place greater thermal stress on via barrel structures. For designs that include through-hole components, the D coupon evaluation directly reflects the reliability of those plated holes \u2014 a topic covered in depth in the <a href=\"https:\/\/wellspcba.com\/fr\/tht-assembly-process\/\" target=\"_blank\" rel=\"noreferrer noopener\">THT assembly process<\/a> guide.<\/p>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"683\" data-src=\"https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-d-coupon-thermal-cycling-reliability-test-chamber-1024x683.webp\" alt=\"Thermal cycling chamber used for PCB D-coupon reliability testing \u2014 interconnect resistance monitored during IPC-TM-650 thermal stress cycles at Wells Electronics\" class=\"wp-image-1662 lazyload\" data-srcset=\"https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-d-coupon-thermal-cycling-reliability-test-chamber-1024x683.webp 1024w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-d-coupon-thermal-cycling-reliability-test-chamber-300x200.webp 300w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-d-coupon-thermal-cycling-reliability-test-chamber-768x512.webp 768w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-d-coupon-thermal-cycling-reliability-test-chamber-18x12.webp 18w, https:\/\/wellspcba.com\/wp-content\/uploads\/2026\/05\/pcb-d-coupon-thermal-cycling-reliability-test-chamber.webp 1536w\" data-sizes=\"(max-width: 1024px) 100vw, 1024px\" src=\"data:image\/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==\" style=\"--smush-placeholder-width: 1024px; --smush-placeholder-aspect-ratio: 1024\/683;\" \/><\/figure>\n\n\n<h3>Type Z \/ Impedance Coupon \u2014 The Signal Integrity Gate<\/h3>\n\n\n<p>The impedance coupon is the most frequently requested coupon type in contemporary PCB manufacturing, driven by the prevalence of high-speed digital interfaces (DDR4\/DDR5, PCIe Gen 4\/5, USB 3.x, 10\/25G Ethernet) that require tightly controlled characteristic impedance.<\/p>\n\n\n\n<p>The coupon contains one or more controlled-impedance traces \u2014 typically a combination of single-ended 50\u03a9 microstrip\/stripline and 100\u03a9 differential pairs \u2014 that mirror the critical signal lines in the production design. Because the coupon is built on the same panel with the same stack-up and materials, its measured impedance provides a validated snapshot of how the manufacturing process has performed for that entire panel batch.<\/p>\n\n\n\n<p>Measurement is performed using a Time Domain Reflectometer (TDR), which injects a fast-rise-time pulse (&lt;100ps rise time) into the coupon trace and measures reflected signals at impedance discontinuities. The result is a waveform showing impedance vs. distance along the trace, from which the characteristic impedance Z\u2080 is extracted and compared to the design specification. (<a href=\"https:\/\/standards.globalspec.com\/std\/34703\/IPC-TM-650%202.5.5.7\" target=\"_blank\" rel=\"noopener\">IPC-TM-650 2.5.5.7<\/a>)<\/p>\n\n\n\n<p>Standard manufacturing tolerance for controlled impedance is \u00b110%. Tighter tolerances (\u00b15% or \u00b13%) are achievable but require process controls and material upgrades that affect cost and lead time.<\/p>\n\n\n<h2>How a Coupon Test Station Works: Step-by-Step<\/h2>\n\n\n<p>The coupon test station operates as a quality gate between fabrication completion and product release. Here is the full workflow as it occurs in a professional PCB factory:<\/p>\n\n\n\n<p><strong>Step 1 \u2014 Panel Fabrication (concurrent)<\/strong> Test coupons are fabricated on the same panel as production boards. No special setup is required because they use identical materials, processes, and process parameters. The coupon panel positions are defined in the fabrication drawing \u2014 typically at the panel edge or between board arrays to minimize impact on usable area.<\/p>\n\n\n\n<p><strong>Step 2 \u2014 Coupon Separation<\/strong> After panel processing is complete, test coupons are routed or scored from the panel. Separation must be clean \u2014 mechanical damage to the coupon edge can affect the validity of cross-section analysis near the board perimeter.<\/p>\n\n\n\n<p><strong>Step 3 \u2014 TDR Impedance Measurement (Type Z coupons)<\/strong> The impedance coupon is placed in the TDR fixture, which uses spring-loaded probes to contact the measurement pads at the coupon ends. The TDR instrument injects the test pulse, captures the reflected waveform, and software extracts the characteristic impedance. Results are compared against the specified target and tolerance. A measurement report is generated showing measured impedance vs. target at multiple points along the coupon trace.<\/p>\n\n\n\n<p><strong>Step 4 \u2014 Microsection Preparation and Analysis (A\/B coupons)<\/strong> The coupon section containing the via structures is cut to approximately 19mm \u00d7 19mm (\u00be&#8221; square), mounted in epoxy resin under vacuum (to preserve void structures), ground progressively through 240\/400\/600\/800\/1200-grit abrasive, and polished to a mirror finish. The cross-section is then examined under a metallurgical microscope at 50\u00d7\u2013200\u00d7 magnification. Key measurements: barrel copper thickness, annular ring geometry, dielectric layer thicknesses, and absence of cracks or delamination. Photographic documentation is captured and compared against IPC-A-600 acceptance criteria.<\/p>\n\n\n\n<p><strong>Step 5 \u2014 Thermal Stress \/ IST Testing (D coupons)<\/strong> D coupons are loaded into the thermal stress chamber. The test profile is programmed per the applicable IPC-TM-650 method. Resistance of each daisy-chain net is measured and logged continuously \u2014 typically at one reading per second per net \u2014 throughout the temperature cycling sequence. Post-test analysis compares initial and final resistance values, flagging any net exceeding the 5% change criterion as a potential reliability concern.<\/p>\n\n\n\n<p><strong>Step 6 \u2014 Documentation and Disposition<\/strong> Test results are compiled into a coupon test report, which becomes part of the lot traceability record. If all results are within specification, the panel lot is released. If any coupon fails its acceptance criteria, the lot is placed on hold pending engineering review, and the root cause is investigated before any boards are released to assembly.<\/p>\n\n\n<h2>When Does Your PCB Design Need Coupon Testing?<\/h2>\n\n\n<p>Not every board requires every coupon type. The selection is driven by design complexity, application requirements, and the applicable IPC class.<\/p>\n\n\n<h3>By IPC Performance Class<\/h3>\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>IPC Class<\/th><th>Application<\/th><th>Coupon Requirement<\/th><\/tr><\/thead><tbody><tr><td><strong>Class 1<\/strong><\/td><td>Consumer, non-critical<\/td><td>Not typically required<\/td><\/tr><tr><td><strong>Class 2<\/strong><\/td><td>Industrial, communications, computing<\/td><td>A\/B coupon standard; impedance coupon for controlled-impedance nets<\/td><\/tr><tr><td><strong>Class 3<\/strong><\/td><td>Medical, aerospace, military, automotive<\/td><td>A\/B + D coupons mandatory; impedance coupon required for any controlled-impedance net; full traceability documentation<\/td><\/tr><tr><td><strong>Class 3\/A (Space)<\/strong><\/td><td>Space and extreme reliability<\/td><td>All coupon types; 100% cross-section sampling<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n<h3>By Design Characteristics<\/h3>\n\n\n<p><strong>Impedance coupon is required when:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>The design contains any net with a controlled impedance specification (50\u03a9, 75\u03a9, 100\u03a9 differential, etc.)<\/li>\n\n\n\n<li>Layer count is 4 or higher with inner-layer routing of high-speed signals<\/li>\n\n\n\n<li>Operating frequency exceeds approximately 50 MHz, or data rates exceed approximately 500 Mbps<\/li>\n\n\n\n<li>The design uses DDR memory interfaces, PCIe, USB 3.x, HDMI, or any multi-gigabit serial interface<\/li>\n<\/ul>\n\n\n\n<p><strong>A\/B + D coupons are required when:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>The board will undergo multiple reflow cycles during assembly (typical for double-sided SMT)<\/li>\n\n\n\n<li>The design is targeting IPC Class 3 performance<\/li>\n\n\n\n<li>The application involves extended thermal cycling in operation (automotive under-hood, industrial outdoor, aerospace)<\/li>\n\n\n\n<li>Via aspect ratios exceed 8:1 (high-aspect-ratio vias are more susceptible to barrel cracking)<\/li>\n<\/ul>\n\n\n\n<p><strong>All coupon types are recommended when:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>The board is a medical device, automotive ECU, aerospace module, or other safety-critical application<\/li>\n\n\n\n<li>The design is entering high-volume production and coupon data will form the process control baseline \u2014 for an overview of what high-volume production entails, see <a href=\"https:\/\/wellspcba.com\/fr\/high-volume-pcb-assembly-services\/\">high-volume PCB assembly services<\/a><\/li>\n\n\n\n<li>The design uses HDI via structures (microvias, stacked vias, filled and capped vias) that cannot be inspected by standard AOI<\/li>\n<\/ul>\n\n\n<h2>Coupon Test Station Requirements: What a Capable Factory Must Have<\/h2>\n\n\n<p>When evaluating a PCB manufacturing partner for designs that require coupon testing, verify the following equipment and capabilities are in-house, calibrated, and documented:<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Capability<\/th><th>Required Equipment<\/th><th>Industry Standard<\/th><\/tr><\/thead><tbody><tr><td>Impedance measurement<\/td><td>Calibrated TDR (\u2264100ps rise time) with controlled impedance probe fixture<\/td><td>IPC-TM-650 2.5.5.7<\/td><\/tr><tr><td>Microsection analysis<\/td><td>Vacuum mounting press, progressive grinder\/polisher, calibrated metallurgical microscope with camera<\/td><td>IPC-TM-650 2.1.1 \/ IPC-A-600<\/td><\/tr><tr><td>Thermal stress \/ IST<\/td><td>Thermal cycling chamber with 4-wire resistance monitoring<\/td><td>IPC-TM-650 2.6.7.2<\/td><\/tr><tr><td>Plating thickness measurement<\/td><td>Cross-section measurement with calibrated micrometer stage or image analysis software<\/td><td>IPC-6012<\/td><\/tr><tr><td>SIR testing<\/td><td>Climate chamber with controlled humidity, voltage bias capability<\/td><td>IPC-TM-650 2.6.3.7<\/td><\/tr><tr><td>Data documentation<\/td><td>Test report generation with pass\/fail criteria vs. IPC specification<\/td><td>Per applicable IPC-6012 class<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p>A factory that cannot provide a calibrated TDR impedance report with measured vs. specified values is not providing meaningful impedance verification \u2014 it is providing a process assumption, not a quality measurement.<\/p>\n\n\n<h2>The Coupon Test Station from the Manufacturer&#8217;s Perspective<\/h2>\n\n<h3>What the Data Reveals That Nothing Else Can<\/h3>\n\n\n<p>From a process control standpoint, the coupon test station is not just a quality gate \u2014 it is the primary source of actionable process feedback in PCB fabrication. Consider what the TDR waveform from an impedance coupon actually reveals:<\/p>\n\n\n\n<p>A deviation in measured impedance of +6% from target on a microstrip trace might indicate that the dielectric prepreg is 4% thinner than specified after lamination \u2014 a condition that develops gradually as press platens accumulate polymer build-up. Without coupon testing, this process drift would be invisible until field failures began accumulating. With regular coupon testing, it triggers a press maintenance action before a single out-of-specification board ships.<\/p>\n\n\n\n<p>Similarly, a D-coupon resistance increase of 3.8% at cycle 150 \u2014 still within the 5% pass criterion \u2014 might signal that via plating uniformity is approaching the lower control limit, prompting a plating bath chemistry check before the next production run crosses the threshold.<\/p>\n\n\n\n<p>This is why experienced manufacturers do not just test coupons to pass customer audits. They use coupon data as a statistical process control (SPC) tool, trending measurements across panel lots to identify process drift before it causes product failures.<\/p>\n\n\n<h3>Common Coupon Design Mistakes That Invalidate Results<\/h3>\n\n\n<p>The following errors in coupon design or placement produce measurements that do not accurately represent the production boards:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>Using a different copper weight on the coupon than on the production board<\/strong> \u2014 dielectric thickness after lamination is a function of copper coverage; a coupon with mismatched copper density will exhibit different dielectric compression and therefore different impedance<\/li>\n\n\n\n<li><strong>Placing the coupon in a panel location that does not receive representative plating current density<\/strong> \u2014 panel edges typically receive higher plating current than the interior; a coupon placed at the extreme panel edge may overstate copper thickness in the production board interior<\/li>\n\n\n\n<li><strong>Routing the TDR access traces at an angle or with unnecessary corners<\/strong> \u2014 any geometry change on the coupon trace creates an impedance discontinuity in the TDR waveform that obscures the measurement<\/li>\n\n\n\n<li><strong>Insufficient trace length for TDR resolution<\/strong> \u2014 at \u00b110% tolerance, the TDR must be able to resolve the average impedance over a minimum trace length; traces shorter than approximately 75mm reduce measurement repeatability<\/li>\n\n\n\n<li><strong>Omitting reference plane layers from the coupon<\/strong> \u2014 for stripline impedance coupons, the reference planes must be present and at the correct distance; a coupon that omits the reference plane structure does not represent the actual board condition<\/li>\n<\/ol>\n\n\n<h2>Coupon Testing in High-Frequency and HDI PCBs<\/h2>\n\n\n<p>For high-frequency and HDI designs, the coupon test station takes on additional significance because the failure modes it detects are more likely to cause system-level failures, and the tolerance windows are tighter.<\/p>\n\n\n<h3>High-Frequency Boards (RF\/Microwave, 5G, mmWave)<\/h3>\n\n\n<p>High-frequency boards using materials such as Rogers RO4350B, Taconic TLX, or PTFE-based laminates require impedance verification because the dielectric constant (Dk) of these materials varies with frequency and moisture absorption in ways that standard FR-4 does not. A coupon-measured impedance of 50.2\u03a9 at DC may be 49.1\u03a9 at 10 GHz due to dispersion effects \u2014 information that only emerges from vector network analyzer (VNA) measurement of frequency-swept coupons, not from standard single-frequency TDR alone.<\/p>\n\n\n\n<p>At Wells Electronics, high-frequency board coupons are measured both by TDR for production pass\/fail verification and, for critical RF designs, by VNA swept-frequency measurement to characterize insertion loss and verify Dk consistency with the material datasheet.<\/p>\n\n\n<h3>HDI Boards (Blind\/Buried\/Stacked Microvias)<\/h3>\n\n\n<p>HDI designs present a unique challenge because their via structures \u2014 laser-drilled microvias with diameters of 50\u2013100\u00b5m \u2014 cannot be inspected by standard optical methods after fabrication. The only way to verify that microvia stacking is properly registered, that copper plating in the microvia barrel meets the 12\u00b5m minimum (IPC Class 2) or 15\u00b5m minimum (IPC Class 3) requirement, and that the via fill material (if used) is free of voids is through cross-section analysis of a coupon that contains the identical microvia structures.<\/p>\n\n\n\n<p>For HDI boards, the A\/B coupon must include both the microvia types present in the design (blind, buried, stacked, or filled-and-capped) and the standard through-via structures, to provide a complete picture of the layer interconnect quality.<\/p>\n\n\n<h2>Interpreting Your Coupon Test Report: What to Look For<\/h2>\n\n\n<p>When a PCB manufacturer provides a coupon test report with your order, here is how to evaluate whether it provides genuine quality assurance:<\/p>\n\n\n\n<p><strong>For impedance (TDR) reports:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Is the measured impedance stated as a specific value (e.g., &#8220;49.8\u03a9&#8221;) or just &#8220;PASS&#8221;? Specific values are more useful and indicate a properly calibrated system<\/li>\n\n\n\n<li>Is the measurement uncertainty of the TDR stated? Well-calibrated systems typically achieve \u00b11\u20132% measurement uncertainty<\/li>\n\n\n\n<li>Are single-ended and differential results reported separately? They should be<\/li>\n\n\n\n<li>Is the TDR instrument model and calibration date documented? This is required for audit purposes in Class 3 applications<\/li>\n<\/ul>\n\n\n\n<p><strong>For microsection (cross-section) reports:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Are photographic images included showing the barrel cross-section at multiple vias?<\/li>\n\n\n\n<li>Are measured values stated (barrel copper thickness in \u00b5m, dielectric layer thickness in mm)?<\/li>\n\n\n\n<li>Do the measured values compare explicitly to the IPC-6012 Class acceptance criteria?<\/li>\n\n\n\n<li>Is the coupon lot number traceable to the production panel lot number?<\/li>\n<\/ul>\n\n\n\n<p><strong>For thermal stress \/ D-coupon reports:<\/strong><\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Is the resistance change at each measurement interval plotted or tabulated?<\/li>\n\n\n\n<li>Is the final % resistance change at test completion stated for each net?<\/li>\n\n\n\n<li>Is the pass\/fail criterion explicitly stated (\u22645% change per IPC-TM-650 2.6.7.2)?<\/li>\n<\/ul>\n\n\n\n<p>A report that only states &#8220;PASS&#8221; without supporting data is not a quality document \u2014 it is a declaration that cannot be verified. For broader context on the quality documentation standards that professional PCBA manufacturers maintain throughout the production process, the <a href=\"https:\/\/wellspcba.com\/fr\/pcba-manufacturing-guide\/\">PCBA manufacturing guide<\/a> covers the full quality framework.<\/p>\n\n\n\n<p><strong><a href=\"https:\/\/wellspcba.com\/fr\/get-quote\/\" target=\"_blank\" rel=\"noreferrer noopener\">Get a Quote from Wells in 24 Hours \u2192<\/a><\/strong><\/p>\n\n\n<h2>FAQ<\/h2>\n\n\n<div data-wp-context=\"{ &quot;autoclose&quot;: false, &quot;accordionItems&quot;: [] }\" data-wp-interactive=\"core\/accordion\" role=\"group\" class=\"wp-block-accordion is-layout-flow wp-block-accordion-is-layout-flow\">\n<div data-wp-class--is-open=\"state.isOpen\" data-wp-context=\"{ &quot;id&quot;: &quot;accordion-item-1&quot;, &quot;openByDefault&quot;: false }\" data-wp-init=\"callbacks.initAccordionItems\" data-wp-on-window--hashchange=\"callbacks.hashChange\" class=\"wp-block-accordion-item is-layout-flow wp-block-accordion-item-is-layout-flow\">\n<h3 class=\"wp-block-accordion-heading\"><button aria-expanded=\"false\" aria-controls=\"accordion-item-1-panel\" data-wp-bind--aria-expanded=\"state.isOpen\" data-wp-on--click=\"actions.toggle\" data-wp-on--keydown=\"actions.handleKeyDown\" id=\"accordion-item-1\" type=\"button\" class=\"wp-block-accordion-heading__toggle\"><span class=\"wp-block-accordion-heading__toggle-title\">Q1: What is a coupon test station in PCB manufacturing?<\/span><span class=\"wp-block-accordion-heading__toggle-icon\" aria-hidden=\"true\">+<\/span><\/button><\/h3>\n\n\n\n<div inert aria-labelledby=\"accordion-item-1\" data-wp-bind--inert=\"!state.isOpen\" id=\"accordion-item-1-panel\" role=\"region\" class=\"wp-block-accordion-panel is-layout-flow wp-block-accordion-panel-is-layout-flow\">\n<p>A coupon test station is a dedicated area within a PCB fabrication facility equipped with instruments \u2014 including a Time Domain Reflectometer (TDR), microsectioning equipment, and thermal stress chambers \u2014 used to test non-functional PCB sections called test coupons. These coupons are fabricated on the same panel as production boards and serve as quality proxies, allowing impedance, plating, via reliability, and lamination integrity to be verified without damaging the finished product boards.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n<div data-wp-context=\"{ &quot;autoclose&quot;: false, &quot;accordionItems&quot;: [] }\" data-wp-interactive=\"core\/accordion\" role=\"group\" class=\"wp-block-accordion is-layout-flow wp-block-accordion-is-layout-flow\">\n<div data-wp-class--is-open=\"state.isOpen\" data-wp-context=\"{ &quot;id&quot;: &quot;accordion-item-2&quot;, &quot;openByDefault&quot;: false }\" data-wp-init=\"callbacks.initAccordionItems\" data-wp-on-window--hashchange=\"callbacks.hashChange\" class=\"wp-block-accordion-item is-layout-flow wp-block-accordion-item-is-layout-flow\">\n<h3 class=\"wp-block-accordion-heading\"><button aria-expanded=\"false\" aria-controls=\"accordion-item-2-panel\" data-wp-bind--aria-expanded=\"state.isOpen\" data-wp-on--click=\"actions.toggle\" data-wp-on--keydown=\"actions.handleKeyDown\" id=\"accordion-item-2\" type=\"button\" class=\"wp-block-accordion-heading__toggle\"><span class=\"wp-block-accordion-heading__toggle-title\">Q2: What is a PCB test coupon and where is it located on the panel?<\/span><span class=\"wp-block-accordion-heading__toggle-icon\" aria-hidden=\"true\">+<\/span><\/button><\/h3>\n\n\n\n<div inert aria-labelledby=\"accordion-item-2\" data-wp-bind--inert=\"!state.isOpen\" id=\"accordion-item-2-panel\" role=\"region\" class=\"wp-block-accordion-panel is-layout-flow wp-block-accordion-panel-is-layout-flow\">\n<p>A PCB test coupon is a small, non-functional section added to the edge of a circuit board panel during fabrication. It replicates the critical structural features of the production boards \u2014 same layer stack-up, same copper weights, same via configurations \u2014 but contains no functional circuitry. It is fabricated on the panel edge or between board arrays to use space that would otherwise be wasted, and is separated from the panel after processing for testing. (<a href=\"https:\/\/en.wikipedia.org\/wiki\/Coupon_(PWB)\" target=\"_blank\" rel=\"noreferrer noopener\">Wikipedia: Coupon (PWB)<\/a>)<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n<div data-wp-context=\"{ &quot;autoclose&quot;: false, &quot;accordionItems&quot;: [] }\" data-wp-interactive=\"core\/accordion\" role=\"group\" class=\"wp-block-accordion is-layout-flow wp-block-accordion-is-layout-flow\">\n<div data-wp-class--is-open=\"state.isOpen\" data-wp-context=\"{ &quot;id&quot;: &quot;accordion-item-3&quot;, &quot;openByDefault&quot;: false }\" data-wp-init=\"callbacks.initAccordionItems\" data-wp-on-window--hashchange=\"callbacks.hashChange\" class=\"wp-block-accordion-item is-layout-flow wp-block-accordion-item-is-layout-flow\">\n<h3 class=\"wp-block-accordion-heading\"><button aria-expanded=\"false\" aria-controls=\"accordion-item-3-panel\" data-wp-bind--aria-expanded=\"state.isOpen\" data-wp-on--click=\"actions.toggle\" data-wp-on--keydown=\"actions.handleKeyDown\" id=\"accordion-item-3\" type=\"button\" class=\"wp-block-accordion-heading__toggle\"><span class=\"wp-block-accordion-heading__toggle-title\">Q3: What are the most common types of PCB test coupons?<\/span><span class=\"wp-block-accordion-heading__toggle-icon\" aria-hidden=\"true\">+<\/span><\/button><\/h3>\n\n\n\n<div inert aria-labelledby=\"accordion-item-3\" data-wp-bind--inert=\"!state.isOpen\" id=\"accordion-item-3-panel\" role=\"region\" class=\"wp-block-accordion-panel is-layout-flow wp-block-accordion-panel-is-layout-flow\">\n<p>The most commonly used PCB test coupon types, defined under IPC-2221, are: the A\/B coupon for via and plating inspection via microsectioning; the D coupon for via reliability testing under thermal cycling; and the Type Z (impedance) coupon for TDR-based controlled impedance verification. Additional types include the H coupon (surface insulation resistance), S coupon (solderability), and P coupon (copper foil peel strength).<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n<div data-wp-context=\"{ &quot;autoclose&quot;: false, &quot;accordionItems&quot;: [] }\" data-wp-interactive=\"core\/accordion\" role=\"group\" class=\"wp-block-accordion is-layout-flow wp-block-accordion-is-layout-flow\">\n<div data-wp-class--is-open=\"state.isOpen\" data-wp-context=\"{ &quot;id&quot;: &quot;accordion-item-4&quot;, &quot;openByDefault&quot;: false }\" data-wp-init=\"callbacks.initAccordionItems\" data-wp-on-window--hashchange=\"callbacks.hashChange\" class=\"wp-block-accordion-item is-layout-flow wp-block-accordion-item-is-layout-flow\">\n<h3 class=\"wp-block-accordion-heading\"><button aria-expanded=\"false\" aria-controls=\"accordion-item-4-panel\" data-wp-bind--aria-expanded=\"state.isOpen\" data-wp-on--click=\"actions.toggle\" data-wp-on--keydown=\"actions.handleKeyDown\" id=\"accordion-item-4\" type=\"button\" class=\"wp-block-accordion-heading__toggle\"><span class=\"wp-block-accordion-heading__toggle-title\">Q4: Does every PCB need coupon testing?<\/span><span class=\"wp-block-accordion-heading__toggle-icon\" aria-hidden=\"true\">+<\/span><\/button><\/h3>\n\n\n\n<div inert aria-labelledby=\"accordion-item-4\" data-wp-bind--inert=\"!state.isOpen\" id=\"accordion-item-4-panel\" role=\"region\" class=\"wp-block-accordion-panel is-layout-flow wp-block-accordion-panel-is-layout-flow\">\n<p>Not every PCB requires coupon testing. Simple, single-layer or double-layer boards for non-critical consumer applications typically do not. However, coupon testing is strongly recommended \u2014 and often required by specification \u2014 for any board that contains controlled-impedance traces, uses blind or buried vias, targets IPC Class 3 performance, serves a regulated industry (medical, automotive, aerospace), or is going into high-volume production where the coupon data forms the process control baseline.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n<div data-wp-context=\"{ &quot;autoclose&quot;: false, &quot;accordionItems&quot;: [] }\" data-wp-interactive=\"core\/accordion\" role=\"group\" class=\"wp-block-accordion is-layout-flow wp-block-accordion-is-layout-flow\">\n<div data-wp-class--is-open=\"state.isOpen\" data-wp-context=\"{ &quot;id&quot;: &quot;accordion-item-5&quot;, &quot;openByDefault&quot;: false }\" data-wp-init=\"callbacks.initAccordionItems\" data-wp-on-window--hashchange=\"callbacks.hashChange\" class=\"wp-block-accordion-item is-layout-flow wp-block-accordion-item-is-layout-flow\">\n<h3 class=\"wp-block-accordion-heading\"><button aria-expanded=\"false\" aria-controls=\"accordion-item-5-panel\" data-wp-bind--aria-expanded=\"state.isOpen\" data-wp-on--click=\"actions.toggle\" data-wp-on--keydown=\"actions.handleKeyDown\" id=\"accordion-item-5\" type=\"button\" class=\"wp-block-accordion-heading__toggle\"><span class=\"wp-block-accordion-heading__toggle-title\">Q5: What is TDR and how is it used in coupon testing?<\/span><span class=\"wp-block-accordion-heading__toggle-icon\" aria-hidden=\"true\">+<\/span><\/button><\/h3>\n\n\n\n<div inert aria-labelledby=\"accordion-item-5\" data-wp-bind--inert=\"!state.isOpen\" id=\"accordion-item-5-panel\" role=\"region\" class=\"wp-block-accordion-panel is-layout-flow wp-block-accordion-panel-is-layout-flow\">\n<p>TDR stands for Time Domain Reflectometry. A TDR instrument injects a fast-rise-time electrical pulse (typically &lt;100ps) into an impedance test coupon trace and measures the amplitude and timing of reflected signals at impedance discontinuities along the trace. From the reflected waveform, the characteristic impedance Z\u2080 of the trace is calculated and compared to the design specification. TDR measurement of impedance coupons is the industry-standard method per IPC-TM-650 method 2.5.5.7 and is the only way to verify that a controlled-impedance PCB has been fabricated within the specified tolerance.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n<div data-wp-context=\"{ &quot;autoclose&quot;: false, &quot;accordionItems&quot;: [] }\" data-wp-interactive=\"core\/accordion\" role=\"group\" class=\"wp-block-accordion is-layout-flow wp-block-accordion-is-layout-flow\">\n<div data-wp-class--is-open=\"state.isOpen\" data-wp-context=\"{ &quot;id&quot;: &quot;accordion-item-6&quot;, &quot;openByDefault&quot;: false }\" data-wp-init=\"callbacks.initAccordionItems\" data-wp-on-window--hashchange=\"callbacks.hashChange\" class=\"wp-block-accordion-item is-layout-flow wp-block-accordion-item-is-layout-flow\">\n<h3 class=\"wp-block-accordion-heading\"><button aria-expanded=\"false\" aria-controls=\"accordion-item-6-panel\" data-wp-bind--aria-expanded=\"state.isOpen\" data-wp-on--click=\"actions.toggle\" data-wp-on--keydown=\"actions.handleKeyDown\" id=\"accordion-item-6\" type=\"button\" class=\"wp-block-accordion-heading__toggle\"><span class=\"wp-block-accordion-heading__toggle-title\">Q6: How does a PCB manufacturer specify test coupon requirements in fab notes?<\/span><span class=\"wp-block-accordion-heading__toggle-icon\" aria-hidden=\"true\">+<\/span><\/button><\/h3>\n\n\n\n<div inert aria-labelledby=\"accordion-item-6\" data-wp-bind--inert=\"!state.isOpen\" id=\"accordion-item-6-panel\" role=\"region\" class=\"wp-block-accordion-panel is-layout-flow wp-block-accordion-panel-is-layout-flow\">\n<p>PCB designers communicate coupon requirements to the fabricator through fabrication notes in the design package. Key items to include are: the applicable IPC performance class (Class 2 or Class 3), the controlled impedance specifications (target value, tolerance, trace type \u2014 single-ended or differential, microstrip or stripline), the required coupon types (A\/B, D, Type Z, etc.), the number of coupons required, and whether a coupon test report is required with the shipment. The fabricator then designs the actual coupon patterns based on the final stack-up and these specifications. Designers do not typically create the coupon layouts themselves.<\/p>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n<div id=\"bitforms_1_1658_1\" class=\"bit-form Au1 Cd1 _frm-bg-b1\">\n      \n          <form novalidate id=\"form-bitforms_1_1658_1\" class=\"As1 At1 _frm-b1\" enctype=\"multipart\/form-data\" method='post' action=\"\">\n              <input type=\"text\" class=\"d-none\" name=\"csrf\" value=\"tbABSRGHdDs+V5W8FGhXnNzhp9CQlWP70ZaaXmjtSZ0=\">\n              <input type=\"text\" class=\"d-none\" name=\"t_identity\" value=\"MLR7Wsxal3bIJUdhnaqvV\/+aw46xYtcAj\/tNqhHTmuk=\">\n              \n              <input type=\"text\" class=\"d-none\" name=\"bitforms_id\" value=\"bitforms_1\">\n                  <div class=\"btcd-fld-itm b1-2\">\n        <div \n      \n      class=\"R1 V1 W1 X1 b1-2-fld-wrp bf-fld-wrp\"\n    >\n            <div \n        \n        class=\"L1 AG1 AK1 b1-2-lbl-wrp bf-lbl-wrp\" \n      >\n              <label \n         \n        class=\"A1 E1 L1 AG1 AH1 AI1 AJ1 Ca1 b1-2-lbl bf-lbl\"\n        for=\"b1-2-1\">\n        \n        \n        Nom\n        \n              <span \n        \n        class=\"AL1 AM1 b1-2-req-smbl bf-req-smbl\" \n      >\n        *\n      <\/span>\n      <\/label>\n        \n      <\/div>\n      <div \n        \n        class=\"b1-2-inp-wrp bf-inp-wrp\"\n      > \n            <div \n      \n      class=\"X1 AF1 b1-2-inp-fld-wrp bf-inp-fld-wrp\"\n    >\n      <input\n        \n        id=\"b1-2-1\"\n        \n        class=\"B1 F1 G1 i1 j1 k1 l1 m1 n1 o1 p1 q1 r1 s1 t1 u1 v1 w1 x1 y1 z1 AA1 AB1 AC1 AD1 AE1 CQ1 CR1 CS1 CT1 CU1 CV1 CW1 CX1 CY1 CZ1 b1-2-fld bf-fld\"\n        type=\"text\"\n        required\n placeholder='Jean Dupont'\n        \n        \n        autocomplete='name'\n        \n        name='text-b1-2'\n        \n        \n      \/>\n      \n      \n    <\/div>\n    \n        \n            <div class='S1 T1 U1 b1-2-err-wrp bf-err-wrp' style=\"opacity: 0 !important; height: 0px !important;\">\n    <div class='Q1 b1-2-err-inner bf-err-inner'>\n      \n        \n        <div   class=\"A1 E1 Y1 Z1 a1 b1 c1 d1 e1 f1 g1 h1 b1-2-err-msg bf-err-msg  R1 b1-2-err-txt bf-err-txt\" style='display: none !important;'><\/div>\n        \n      \n      <\/div>\n    <\/div>\n      <\/div>\n    <\/div>\n<\/div><div class=\"btcd-fld-itm b1-5\">\n        <div \n      \n      class=\"R1 V1 W1 X1 b1-5-fld-wrp bf-fld-wrp\"\n    >\n            <div \n        \n        class=\"L1 AG1 AK1 b1-5-lbl-wrp bf-lbl-wrp\" \n      >\n              <label \n         \n        class=\"A1 E1 L1 AG1 AH1 AI1 AJ1 Ca1 b1-5-lbl bf-lbl\"\n        for=\"b1-5-1\">\n        \n        \n        Courriel\n        \n              <span \n        \n        class=\"AL1 AM1 b1-5-req-smbl bf-req-smbl\" \n      >\n        *\n      <\/span>\n      <\/label>\n        \n      <\/div>\n      <div \n        \n        class=\"b1-5-inp-wrp bf-inp-wrp\"\n      > \n            <div \n      \n      class=\"X1 AF1 b1-5-inp-fld-wrp bf-inp-fld-wrp\"\n    >\n      <input\n        \n        id=\"b1-5-1\"\n        \n        class=\"B1 F1 G1 i1 j1 k1 l1 m1 n1 o1 p1 q1 r1 s1 t1 u1 v1 w1 x1 y1 z1 AA1 AB1 AC1 AD1 AE1 CQ1 CR1 CS1 CT1 CU1 CV1 CW1 CX1 CY1 CZ1 b1-5-fld bf-fld\"\n        type=\"email\"\n        required\n placeholder='example@mail.com'\n        \n        \n        autocomplete='email'\n        \n        name='email-b1-5'\n        \n        \n      \/>\n      \n      \n    <\/div>\n    \n        \n            <div class='S1 T1 U1 b1-5-err-wrp bf-err-wrp' style=\"opacity: 0 !important; height: 0px !important;\">\n    <div class='Q1 b1-5-err-inner bf-err-inner'>\n      \n        \n        <div   class=\"A1 E1 Y1 Z1 a1 b1 c1 d1 e1 f1 g1 h1 b1-5-err-msg bf-err-msg  R1 b1-5-err-txt bf-err-txt\" style='display: none !important;'><\/div>\n        \n      \n      <\/div>\n    <\/div>\n      <\/div>\n    <\/div>\n<\/div><div class=\"btcd-fld-itm b1-8\">\n        <div \n      \n      class=\"R1 V1 W1 X1 b1-8-fld-wrp bf-fld-wrp\"\n    >\n            <div \n        \n        class=\"L1 AG1 AK1 b1-8-lbl-wrp bf-lbl-wrp\" \n      >\n              <label \n         \n        class=\"A1 E1 L1 AG1 AH1 AI1 AJ1 Ca1 b1-8-lbl bf-lbl\"\n        for=\"b1-8-1\">\n        \n        \n        Company\n        \n              <span \n        \n        class=\"AL1 AM1 b1-8-req-smbl bf-req-smbl\" \n      >\n        *\n      <\/span>\n      <\/label>\n        \n      <\/div>\n      <div \n        \n        class=\"b1-8-inp-wrp bf-inp-wrp\"\n      > \n            <div \n      \n      class=\"X1 AF1 b1-8-inp-fld-wrp bf-inp-fld-wrp\"\n    >\n      <textarea\n        \n        id=\"b1-8-1\"\n        class=\"B1 F1 G1 i1 j1 k1 l1 m1 o1 p1 r1 s1 t1 u1 v1 w1 x1 y1 z1 AA1 AB1 AC1 AD1 AE1 AN1 AO1 AP1 CQ1 CR1 CS1 CT1 CU1 CV1 CW1 CX1 CY1 CZ1 b1-8-fld bf-fld\"\n        required\n placeholder='\u5360\u4f4d\u7b26...'\n        \n        name='textarea-1-8'\n      ><\/textarea>\n      \n      \n    <\/div>\n        \n            <div class='S1 T1 U1 b1-8-err-wrp bf-err-wrp' style=\"opacity: 0 !important; height: 0px !important;\">\n    <div class='Q1 b1-8-err-inner bf-err-inner'>\n      \n        \n        <div   class=\"A1 E1 Y1 Z1 a1 b1 c1 d1 e1 f1 g1 h1 b1-8-err-msg bf-err-msg  R1 b1-8-err-txt bf-err-txt\" style='display: none !important;'><\/div>\n        \n      \n      <\/div>\n    <\/div>\n      <\/div>\n    <\/div>\n<\/div><div class=\"btcd-fld-itm b1-6\">\n        <div \n      \n      class=\"R1 V1 W1 X1 b1-6-fld-wrp bf-fld-wrp\"\n    >\n            <div \n        \n        class=\"L1 AG1 AK1 b1-6-lbl-wrp bf-lbl-wrp\" \n      >\n              <label \n         \n        class=\"A1 E1 L1 AG1 AH1 AI1 AJ1 Ca1 b1-6-lbl bf-lbl\"\n        for=\"b1-6-1\">\n        \n        \n        Num\u00e9ro de t\u00e9l\u00e9phone\n        \n        \n      <\/label>\n        \n      <\/div>\n      <div \n        \n        class=\"b1-6-inp-wrp bf-inp-wrp\"\n      > \n            <div class=\"L1 X1 q1 Am1 b1-6-phone-fld-container bf-phone-fld-container\">\n      <div \n        \n        class=\"B1 E1 G1 L1 Q1 i1 j1 k1 l1 Aa1 Ai1 Bd1 Be1 Bf1 Bg1 Bh1 Bi1 Bj1 Bk1 Bl1 CR1 CS1 Cx1 Cy1 Cz1 DA1 DB1 DC1 DD1 DE1 b1-6-phone-fld-wrp bf-phone-fld-wrp\"\n      >\n        <input\n          name='phone-number-1-6'\n          \n          type=\"text\"\n          title=\"Num\u00e9ro de t\u00e9l\u00e9phone Entr\u00e9e cach\u00e9e\"\n          class=\"b1-6-phone-hidden-input bf-phone-hidden-input d-none\"\n          \n          \n          \n        \/>\n        <div class=\"E1 X1 Aj1 b1-6-phone-inner-wrp bf-phone-inner-wrp\">\n                    <div\n            class=\"A1 D1 E1 J1 N1 Q1 X1 a1 e1 h1 AJ1 AS1 BA1 BB1 CP1 Cg1 b1-6-dpd-wrp bf-dpd-wrp\"\n            role=\"combobox\"\n            aria-live=\"assertive\"\n            aria-labelledby=\"country-label-2\"\n            aria-expanded=\"false\"\n            tabindex=\"0\"          >\n            \n                  <div class=\"S1 AQ1 AR1 Az1 b1-6-dpd-down-btn bf-dpd-down-btn\">\n              <svg\n                width=\"15\"\n                height=\"15\"\n                role=\"img\"\n                title=\"Ic\u00f4ne de fl\u00e8che vers le bas\"\n                viewbox=\"0 0 24 24\"\n                fill=\"none\"\n                stroke=\"currentColor\"\n                stroke-width=\"2\"\n                stroke-linecap=\"round\"\n                stroke-linejoin=\"round\"\n              >\n                <polyline points=\"6 9 12 15 18 9\" \/>\n              <\/svg>\n            <\/div>\n          <\/div>\n          <input\n            \n            aria-label=\"Num\u00e9ro de t\u00e9l\u00e9phone\"\n            type=\"tel\"\n            class=\"F1 G1 l1 o1 p1 r1 v1 AS1 AY1 Bm1 CS1 CT1 b1-6-phone-number-input bf-phone-number-input\"\n            autocomplete=\"tel\"\n            placeholder='Num\u00e9ro de t\u00e9l\u00e9phone'\n            tabindex=\"0\"          \/>\n                <button\n        \n        type=\"button\"\n        title=\"Valeur claire\"\n        class=\"D1 AQ1 AT1 AU1 AV1 AW1 AX1 AY1 AZ1 Aa1 Ab1 Ac1 Ad1 Ae1 Af1 Ag1 BC1 BD1 Cb1 Cc1 Ch1 Ci1 b1-6-input-clear-btn bf-input-clear-btn\"\n      >\n        <svg\n          width=\"12\"\n          height=\"12\"\n          viewbox=\"0 0 24 24\"\n          fill=\"none\"\n          stroke=\"currentColor\"\n          stroke-width=\"2\"\n          stroke-linecap=\"round\"\n          stroke-linejoin=\"round\"\n        >\n          <line x1=\"18\" y1=\"6\" x2=\"6\" y2=\"18\" \/>\n          <line x1=\"6\" y1=\"6\" x2=\"18\" y2=\"18\" \/>\n        <\/svg>\n      <\/button>\n        <\/div>   \n                <div \n          \n          class=\"E1 L1 Q1 Ai1 Al1 Bc1 b1-6-option-wrp bf-option-wrp\"\n        >\n          <div class=\"E1 Q1 X1 Ai1 b1-6-option-inner-wrp bf-option-inner-wrp\">\n            <div \n              \n              class=\"X1 Bb1 b1-6-option-search-wrp bf-option-search-wrp\"\n            >\n              <input\n                \n                aria-label=\"Recherche de pays\"\n                type=\"search\"\n                class=\"F1 J1 L1 l1 AI1 Ah1 BF1 BG1 BH1 BI1 BJ1 BK1 BL1 BM1 CS1 Cj1 Ck1 Cl1 Cm1 b1-6-opt-search-input bf-opt-search-input\"\n                placeholder=\"Recherche de pays\"\n                autocomplete=\"off\"\n                tabindex=\"-1\"\n              \/>\n              <svg\n                \n                class=\"AH1 Aa1 Ac1 Ad1 BE1 Ca1 b1-6-opt-search-icn bf-opt-search-icn\"\n                aria-hidden=\"true\"\n                width=\"22\"\n                height=\"22\"\n                viewbox=\"0 0 24 24\"\n                fill=\"none\"\n                stroke=\"currentColor\"\n                stroke-width=\"2\"\n                stroke-linecap=\"round\"\n                stroke-linejoin=\"round\"\n              >\n                <circle cx=\"11\" cy=\"11\" r=\"8\" \/>\n                <line x1=\"21\" y1=\"21\" x2=\"16.65\" y2=\"16.65\" \/>\n              <\/svg>\n                    <button\n        \n        type=\"button\"\n        aria-label=\"Recherche claire\"\n        class=\"D1 AF1 AQ1 AT1 AU1 AV1 AW1 AX1 AY1 AZ1 Aa1 Ab1 Ac1 Ad1 Ae1 Af1 Ag1 Bn1 Bo1 Cb1 Cc1 DF1 DG1 b1-6-search-clear-btn bf-search-clear-btn\"\n        tabindex=\"-1\"\n      >\n        <svg\n          width=\"12\"\n          height=\"12\"\n          viewbox=\"0 0 24 24\"\n          fill=\"none\"\n          stroke=\"currentColor\"\n          stroke-width=\"2\"\n          stroke-linecap=\"round\"\n          stroke-linejoin=\"round\"\n        >\n          <line x1=\"18\" y1=\"6\" x2=\"6\" y2=\"18\" \/>\n          <line x1=\"6\" y1=\"6\" x2=\"18\" y2=\"18\" \/>\n        <\/svg>\n      <\/button>\n            <\/div>\n            <ul\n              \n              class=\"Aj1 Ak1 BN1 BO1 BP1 BQ1 BR1 BS1 BT1 BU1 BV1 BW1 BX1 BY1 BZ1 Ba1 Cn1 Co1 Cp1 Cq1 Cr1 Cs1 Ct1 Cu1 Cv1 Cw1 b1-6-option-list bf-option-list\"\n              tabindex=\"-1\"\n              role=\"listbox\"\n              aria-label=\"liste des pays\"\n            >\n              \n            <\/ul>\n          <\/div>\n        <\/div>\n      <\/div>\n    <\/div>\n        \n            <div class='S1 T1 U1 b1-6-err-wrp bf-err-wrp' style=\"opacity: 0 !important; height: 0px !important;\">\n    <div class='Q1 b1-6-err-inner bf-err-inner'>\n      \n        \n        <div   class=\"A1 E1 Y1 Z1 a1 b1 c1 d1 e1 f1 g1 h1 b1-6-err-msg bf-err-msg  R1 b1-6-err-txt bf-err-txt\" style='display: none !important;'><\/div>\n        \n      \n      <\/div>\n    <\/div>\n      <\/div>\n    <\/div>\n<\/div><div class=\"btcd-fld-itm b1-3\">\n        <div \n      \n      class=\"R1 V1 W1 X1 b1-3-fld-wrp bf-fld-wrp\"\n    >\n            <div \n        \n        class=\"L1 AG1 AK1 b1-3-lbl-wrp bf-lbl-wrp\" \n      >\n              <label \n         \n        class=\"A1 E1 L1 AG1 AH1 AI1 AJ1 Ca1 b1-3-lbl bf-lbl\"\n        for=\"b1-3-1\">\n        \n        \n        Message\n        \n              <span \n        \n        class=\"AL1 AM1 b1-3-req-smbl bf-req-smbl\" \n      >\n        *\n      <\/span>\n      <\/label>\n        \n      <\/div>\n      <div \n        \n        class=\"b1-3-inp-wrp bf-inp-wrp\"\n      > \n            <div \n      \n      class=\"X1 AF1 b1-3-inp-fld-wrp bf-inp-fld-wrp\"\n    >\n      <textarea\n        \n        id=\"b1-3-1\"\n        class=\"B1 F1 G1 i1 j1 k1 l1 m1 o1 p1 r1 s1 t1 u1 v1 w1 x1 y1 z1 AA1 AB1 AC1 AD1 AE1 AN1 AO1 AP1 CQ1 CR1 CS1 CT1 CU1 CV1 CW1 CX1 CY1 CZ1 b1-3-fld bf-fld\"\n        required\n placeholder='R\u00e9digez votre message...'\n        \n        name='textarea-b1-3'\n      ><\/textarea>\n      \n      \n    <\/div>\n        \n            <div class='S1 T1 U1 b1-3-err-wrp bf-err-wrp' style=\"opacity: 0 !important; height: 0px !important;\">\n    <div class='Q1 b1-3-err-inner bf-err-inner'>\n      \n        \n        <div   class=\"A1 E1 Y1 Z1 a1 b1 c1 d1 e1 f1 g1 h1 b1-3-err-msg bf-err-msg  R1 b1-3-err-txt bf-err-txt\" style='display: none !important;'><\/div>\n        \n      \n      <\/div>\n    <\/div>\n      <\/div>\n    <\/div>\n<\/div><div class=\"btcd-fld-itm b1-7\">\n        <div \n      \n      class=\"R1 V1 W1 X1 CB1 CC1 b1-7-fld-wrp bf-fld-wrp\"\n    >\n            <div \n        \n        class=\"L1 AG1 AK1 b1-7-lbl-wrp bf-lbl-wrp\" \n      >\n              <label \n         \n        class=\"A1 E1 L1 AG1 AH1 AI1 AJ1 Ca1 b1-7-lbl bf-lbl\"\n        for=\"b1-7-1\">\n        \n        \n        File Upload\n        \n        \n      <\/label>\n        \n      <\/div>\n      <div \n        \n        class=\"b1-7-inp-wrp bf-inp-wrp\"\n      > \n            <div \n      \n      class=\"b1-7-file-up-container bf-file-up-container\"\n    >\n      <div\n        \n        class=\"b1-7-file-up-wrpr bf-file-up-wrpr\"\n      >\n        <div\n          \n          class=\"Bq1 Br1 Bs1 Bt1 Bu1 Bv1 Bw1 Bx1 By1 DI1 DJ1 DK1 DL1 DM1 DN1 b1-7-file-input-wrpr bf-file-input-wrpr\"\n        >\n          <div\n            \n            class=\"A1 E1 X1 Ao1 b1-7-btn-wrpr bf-btn-wrpr\"\n          >\n            <button\n              \n              type=\"button\"\n              class=\"A1 B1 C1 D1 G1 I1 K1 M1 N1 O1 P1 AU1 Ah1 Ao1 CD1 CP1 DO1 b1-7-inp-btn bf-inp-btn\"\n            >\n             <img decoding=\"async\"\n  \n  class=\"AR1 Aq1 Ar1 b1-7-pre-i bf-pre-i lazyload\"\n  data-src=\"https:\/\/wellspcba.com\/wp-content\/plugins\/bit-form\/assets\/..\/static\/file-upload\/paperclip.svg\"\n  alt=\"\"\n src=\"data:image\/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==\" \/>\n              <span\n                \n                class=\"b1-7-btn-txt bf-btn-txt\"\n              >\n                Attach File\n              <\/span>\n              \n            <\/button>\n                  <div\n        \n        class=\"AH1 Bz1 Ca1 b1-7-file-select-status bf-file-select-status\"\n      >\n        No Choosen File\n      <\/div>\n                  <small\n        \n        class=\"CE1 DP1 b1-7-max-size-lbl bf-max-size-lbl\"\n      >\n      (Max 1024 MB)\n      <\/small>\n            <input\n              \n              type=\"file\"\n              class=\"D1 L1 R1 AU1 Aa1 Aj1 Ap1 CA1 b1-7-file-upload-input bf-file-upload-input\"\n              id=\"b1-7-1\"\n              name='file-up-1-7[]'\n              \n              \n              \n              aria-disabled=\"true\"\n              tabindex=\"-1\"\n            \/>\n          <\/div>\n          <div \n            \n            class=\"err-wrp\"\n          ><\/div>\n        <\/div>\n      <\/div>\n    <\/div>\n        \n            <div class='S1 T1 U1 b1-7-err-wrp bf-err-wrp' style=\"opacity: 0 !important; height: 0px !important;\">\n    <div class='Q1 b1-7-err-inner bf-err-inner'>\n      \n        \n        <div   class=\"A1 E1 Y1 Z1 a1 b1 c1 d1 e1 f1 g1 h1 b1-7-err-msg bf-err-msg  R1 b1-7-err-txt bf-err-txt\" style='display: none !important;'><\/div>\n        \n      \n      <\/div>\n    <\/div>\n      <\/div>\n    <\/div>\n<\/div><div class=\"btcd-fld-itm b1-1\">\n        <div \n      \n      class=\"R1 V1 W1 X1 b1-1-fld-wrp bf-fld-wrp\"\n    >\n      \n      <div \n        \n        class=\"b1-1-inp-wrp bf-inp-wrp\"\n      > \n              <div \n        \n        class=\"E1 b1-1-inp-fld-wrp bf-inp-fld-wrp\"\n      >\n        <button\n          \n          class=\"A1 B1 C1 D1 E1 F1 G1 H1 I1 J1 K1 L1 M1 N1 O1 P1 Av1 Aw1 Ax1 Ay1 CP1 Ce1 Cf1 b1-1-btn bf-btn\"\n          type=\"submit\"\n          name='button-b1-1'\n          \n        >\n          \n          Soumettre\n          \n          <span class=\"bf-spinner d-none\"><\/span>\n        <\/button>\n      <\/div>\n        \n        \n      <\/div>\n    <\/div>\n<\/div>\n          <input type=\"hidden\" name=\"trp-form-language\" value=\"fr\"\/><\/form>\n          \n          <div id='bf-form-msg-wrp-bitforms_1_1658_1'><\/div>\n                      <div role=\"dialog\" aria-hidden=\"true\" data-modal-backdrop=\"true\" class=\"A1 E1 H1 Ap1 CL1 CM1 CN1 msg-container-1 deactive scroll\">\n              <div data-contentid=\"bitforms_1_1658_1\" data-msgid=\"1\" role=\"button\" class=\"A1 E1 H1 L1 Aj1 CK1 msg-background-1 msg-backdrop\">\n                <div class=\"bf-msg-content L1 X1 b1 c1 AH1 Al1 CO1 Ca1 msg-content-1\">\n                  <button data-contentid=\"bitforms_1_1658_1\" data-msgid=\"1\" class=\"D1 S1 V1 AQ1 AU1 Aa1 Ac1 Ad1 Ak1 An1 CG1 CH1 CI1 DQ1 DR1 DS1 close-1 bf-msg-close\" type=\"button\">\n                    <svg class=\"AR1 Ar1 CJ1 close-icn-1\" viewbox=\"0 0 30 30\">\n                      <line fill=\"none\" stroke=\"currentColor\" stroke-linecap=\"round\" stroke-linejoin=\"round\" x1=\"4\" y1=\"3.88\" x2=\"26\" y2=\"26.12\"><\/line>\n                      <line fill=\"none\" stroke=\"currentColor\" stroke-linecap=\"round\" stroke-linejoin=\"round\" x1=\"26\" y1=\"3.88\" x2=\"4\" y2=\"26.12\"><\/line>\n                    <\/svg>\n                  <\/button>\n                  <div class=\"msg-content\"><\/div>\n                <\/div>\n              <\/div>\n            <\/div>\n      <\/div>    <script id=\"bit-form-bf-globals-bitforms_1_1658_1\">      if(!window.bf_globals) { \n        window.bf_globals = {} \n      } if(!window.bf_globals.bitforms_1_1658_1) { \n        window.bf_globals.bitforms_1_1658_1 = {} \n      }\n      if(document.getElementById('bitforms_1_1658_1')) {\n        window.bf_globals.bitforms_1_1658_1 = { \n          ...window.bf_globals.bitforms_1_1658_1, \n          ...{\"ajaxURL\":\"https:\\\/\\\/wellspcba.com\\\/wp-admin\\\/admin-ajax.php\",\"nonce\":\"c6792dff77\",\"version\":\"2.20.6\",\"layout\":{\"lg\":[{\"w\":60,\"h\":80,\"x\":0,\"y\":0,\"i\":\"b1-2\",\"moved\":false,\"static\":false},{\"w\":60,\"h\":80,\"x\":0,\"y\":80,\"i\":\"b1-5\",\"moved\":false,\"static\":false},{\"w\":60,\"h\":101,\"x\":0,\"y\":160,\"i\":\"b1-8\",\"minW\":9,\"moved\":false,\"static\":false,\"resizeHandles\":[\"se\",\"e\"]},{\"w\":60,\"h\":80,\"x\":0,\"y\":261,\"i\":\"b1-6\",\"moved\":false,\"static\":false},{\"w\":60,\"h\":101,\"x\":0,\"y\":341,\"i\":\"b1-3\",\"minW\":9,\"moved\":false,\"static\":false},{\"w\":60,\"h\":81,\"x\":0,\"y\":442,\"i\":\"b1-7\",\"minW\":20,\"moved\":false,\"static\":false},{\"w\":60,\"h\":54,\"x\":0,\"y\":523,\"i\":\"b1-1\",\"moved\":false,\"static\":false}],\"md\":[{\"w\":60,\"h\":80,\"x\":0,\"y\":0,\"i\":\"b1-2\",\"moved\":false,\"static\":false},{\"w\":60,\"h\":80,\"x\":0,\"y\":80,\"i\":\"b1-5\",\"moved\":false,\"static\":false},{\"w\":60,\"h\":101,\"x\":0,\"y\":160,\"i\":\"b1-8\",\"minW\":9,\"moved\":false,\"static\":false,\"resizeHandles\":[\"se\",\"e\"]},{\"w\":60,\"h\":80,\"x\":0,\"y\":261,\"i\":\"b1-6\",\"moved\":false,\"static\":false},{\"w\":60,\"h\":101,\"x\":0,\"y\":341,\"i\":\"b1-3\",\"minW\":9,\"moved\":false,\"static\":false},{\"w\":60,\"h\":81,\"x\":0,\"y\":442,\"i\":\"b1-7\",\"minW\":20,\"moved\":false,\"static\":false},{\"w\":60,\"h\":54,\"x\":0,\"y\":523,\"i\":\"b1-1\",\"moved\":false,\"static\":false}],\"sm\":[{\"w\":60,\"h\":80,\"x\":0,\"y\":0,\"i\":\"b1-2\",\"moved\":false,\"static\":false},{\"w\":60,\"h\":80,\"x\":0,\"y\":80,\"i\":\"b1-5\",\"moved\":false,\"static\":false},{\"w\":60,\"h\":101,\"x\":0,\"y\":160,\"i\":\"b1-8\",\"minW\":9,\"moved\":false,\"static\":false,\"resizeHandles\":[\"se\",\"e\"]},{\"w\":60,\"h\":80,\"x\":0,\"y\":261,\"i\":\"b1-6\",\"moved\":false,\"static\":false},{\"w\":60,\"h\":101,\"x\":0,\"y\":341,\"i\":\"b1-3\",\"minW\":9,\"moved\":false,\"static\":false},{\"w\":60,\"h\":81,\"x\":0,\"y\":442,\"i\":\"b1-7\",\"minW\":20,\"moved\":false,\"static\":false},{\"w\":60,\"h\":54,\"x\":0,\"y\":523,\"i\":\"b1-1\",\"moved\":false,\"static\":false}]},\"nestedLayout\":{},\"fields\":{\"b1-1\":{\"typ\":\"button\",\"btnSiz\":\"md\",\"btnTyp\":\"submit\",\"txt\":\"Submit\",\"icn\":{\"pos\":\"\",\"url\":\"\"},\"valid\":{},\"customClasses\":{},\"customAttributes\":{},\"fulW\":true,\"fieldName\":\"button-b1-1\"},\"b1-2\":{\"typ\":\"text\",\"lbl\":\"Name\",\"phHide\":true,\"valid\":{\"req\":true,\"reqPos\":\"after\",\"reqShow\":true},\"err\":{\"req\":{\"dflt\":\"<p style=\\\"margin:0\\\">\\u6b64\\u5b57\\u6bb5\\u4e3a\\u5fc5\\u586b\\u9879<\\\/p>\",\"show\":true}},\"customClasses\":{},\"customAttributes\":{},\"fieldName\":\"text-b1-2\",\"acHide\":true,\"ac\":\"name\",\"ph\":\"John Doe\"},\"b1-3\":{\"typ\":\"textarea\",\"lbl\":\"Message\",\"phHide\":true,\"valid\":{\"req\":true,\"reqPos\":\"after\",\"reqShow\":true},\"err\":{\"req\":{\"dflt\":\"<p style=\\\"margin:0\\\">\\u6b64\\u5b57\\u6bb5\\u4e3a\\u5fc5\\u586b\\u9879<\\\/p>\",\"show\":true,\"custom\":true,\"msg\":\"<p style=\\\"margin:0\\\">Message can not be empty.<\\\/p>\"}},\"customClasses\":{},\"customAttributes\":{},\"fieldName\":\"textarea-b1-3\",\"ph\":\"Write your message...\"},\"b1-5\":{\"typ\":\"email\",\"lbl\":\"Email\",\"ph\":\"example@mail.com\",\"phHide\":true,\"pattern\":\"^[^$_bf_$s@]+@[^$_bf_$s@]+$_bf_$.[^$_bf_$s@]+$\",\"valid\":{\"req\":true,\"reqPos\":\"after\",\"reqShow\":true},\"err\":{\"invalid\":{\"dflt\":\"<p style=\\\"margin:0\\\">\\u8bf7\\u8f93\\u5165\\u6709\\u6548\\u7684\\u7535\\u5b50\\u90ae\\u4ef6\\u5730\\u5740<\\\/p>\",\"show\":true},\"req\":{\"dflt\":\"<p style=\\\"margin:0\\\">\\u6b64\\u5b57\\u6bb5\\u4e3a\\u5fc5\\u586b\\u9879<\\\/p>\",\"show\":true,\"custom\":true,\"msg\":\"<p style=\\\"margin:0\\\">Please enter your email.<\\\/p>\"}},\"customClasses\":{},\"customAttributes\":{},\"fieldName\":\"email-b1-5\",\"acHide\":true,\"ac\":\"email\"},\"b1-6\":{\"typ\":\"phone-number\",\"lbl\":\"Phone Number\",\"ph\":\"Phone Number\",\"phHide\":true,\"config\":{\"selectedFlagImage\":false,\"selectedCountryClearable\":true,\"searchClearable\":true,\"optionFlagImage\":false,\"defaultCountryKey\":\"\",\"showSearchPh\":true,\"searchPlaceholder\":\"Search for countries\",\"noCountryFoundText\":\"No Country Found\",\"inputFormat\":\"+c #### ### ###\",\"valueFormat\":\"+c #### ### ###\"},\"options\":[{\"i\":\"US\",\"lbl\":\"United States of America (the)\",\"img\":\"us.png\",\"code\":\"+1\",\"ex\":\"2015550123\",\"ptrn\":\"5056(?:[0-35-9]$_bf_$d|4[46])$_bf_$d{4}|(?:4722|505[2-57-9])$_bf_$d{6}|(?:2(?:0[1-35-9]|1[02-9]|2[03-589]|3[149]|4[08]|5[1-46]|6[0279]|7[0269]|8[13])|3(?:0[1-57-9]|1[02-9]|2[01356]|3[0-24679]|4[167]|5[0-2]|6[014]|8[056])|4(?:0[124-9]|1[02-579]|2[3-5]|3[0245]|4[023578]|58|6[349]|7[0589]|8[04])|5(?:0[1-47-9]|1[0235-8]|20|3[0149]|4[01]|5[179]|6[1-47]|7[0-5]|8[0256])|6(?:0[1-35-9]|1[024-9]|2[03689]|[34][016]|5[01679]|6[0-279]|78|8[0-29])|7(?:0[1-46-8]|1[2-9]|2[04-7]|3[1247]|4[037]|5[47]|6[02359]|7[0-59]|8[156])|8(?:0[1-68]|1[02-8]|2[068]|3[0-2589]|4[03578]|5[046-9]|6[02-5]|7[028])|9(?:0[1346-9]|1[02-9]|2[0589]|3[0146-8]|4[01357-9]|5[12469]|7[0-389]|8[04-69]))[2-9]$_bf_$d{6}\"},{\"i\":\"CA\",\"lbl\":\"Canada\",\"img\":\"ca.png\",\"code\":\"+1\",\"ex\":\"5062345678\",\"ptrn\":\"(?:2(?:04|[23]6|[48]9|50|63)|3(?:06|43|54|6[578]|82)|4(?:03|1[68]|[26]8|3[178]|50|74)|5(?:06|1[49]|48|79|8[147])|6(?:04|[18]3|39|47|72)|7(?:0[59]|42|53|78|8[02])|8(?:[06]7|19|25|73)|90[25])[2-9]$_bf_$d{6}\"},{\"i\":\"AG\",\"lbl\":\"Antigua and Barbuda\",\"img\":\"ag.png\",\"code\":\"+1\",\"ex\":\"2684641234\",\"ptrn\":\"268(?:464|7(?:1[3-9]|[28]$_bf_$d|3[0246]|64|7[0-689]))$_bf_$d{4}\"},{\"i\":\"AI\",\"lbl\":\"Anguilla\",\"img\":\"ai.png\",\"code\":\"+1\",\"ex\":\"2642351234\",\"ptrn\":\"264(?:235|4(?:69|76)|5(?:3[6-9]|8[1-4])|7(?:29|72))$_bf_$d{4}\"},{\"i\":\"AS\",\"lbl\":\"American Samoa\",\"img\":\"as.png\",\"code\":\"+1\",\"ex\":\"6847331234\",\"ptrn\":\"684(?:2(?:48|5[2468]|72)|7(?:3[13]|70|82))$_bf_$d{4}\"},{\"i\":\"BB\",\"lbl\":\"Barbados\",\"img\":\"bb.png\",\"code\":\"+1\",\"ex\":\"2462501234\",\"ptrn\":\"246(?:2(?:[3568]$_bf_$d|4[0-57-9])|45$_bf_$d|69[5-7]|8(?:[2-5]$_bf_$d|83))$_bf_$d{4}\"},{\"i\":\"BM\",\"lbl\":\"Bermuda\",\"img\":\"bm.png\",\"code\":\"+1\",\"ex\":\"4413701234\",\"ptrn\":\"441(?:[2378]$_bf_$d|5[0-39])$_bf_$d{5}\"},{\"i\":\"BS\",\"lbl\":\"Bahamas (the)\",\"img\":\"bs.png\",\"code\":\"+1\",\"ex\":\"2423591234\",\"ptrn\":\"242(?:3(?:5[79]|7[56]|95)|4(?:[23][1-9]|4[1-35-9]|5[1-8]|6[2-8]|7$_bf_$d|81)|5(?:2[45]|3[35]|44|5[1-46-9]|65|77)|6[34]6|7(?:27|38)|8(?:0[1-9]|1[02-9]|2$_bf_$d|[89]9))$_bf_$d{4}\"},{\"i\":\"DM\",\"lbl\":\"Dominica\",\"img\":\"dm.png\",\"code\":\"+1\",\"ex\":\"7672251234\",\"ptrn\":\"767(?:2(?:[2-4689]5|7[5-7])|31[5-7]|61[1-8]|70[1-6])$_bf_$d{4}\"},{\"i\":\"DO\",\"lbl\":\"Dominican Republic (the)\",\"img\":\"do.png\",\"code\":\"+1\",\"ex\":\"8092345678\",\"ptrn\":\"8[024]9[2-9]$_bf_$d{6}\"},{\"i\":\"GD\",\"lbl\":\"Grenada\",\"img\":\"gd.png\",\"code\":\"+1\",\"ex\":\"4734031234\",\"ptrn\":\"473(?:4(?:0[2-79]|1[04-9]|2[0-5]|58)|5(?:2[01]|3[3-8])|901)$_bf_$d{4}\"},{\"i\":\"GU\",\"lbl\":\"Guam\",\"img\":\"gu.png\",\"code\":\"+1\",\"ex\":\"6713001234\",\"ptrn\":\"671(?:3(?:00|3[39]|4[349]|55|6[26])|4(?:00|56|7[1-9]|8[02-46-9])|5(?:55|6[2-5]|88)|6(?:3[2-578]|4[24-9]|5[34]|78|8[235-9])|7(?:[0479]7|2[0167]|3[45]|8[7-9])|8(?:[2-57-9]8|6[48])|9(?:2[29]|6[79]|7[1279]|8[7-9]|9[78]))$_bf_$d{4}\"},{\"i\":\"JM\",\"lbl\":\"Jamaica\",\"img\":\"jm.png\",\"code\":\"+1\",\"ex\":\"8762101234\",\"ptrn\":\"(?:658295|876(?:2(?:0[6-9]|[14-9]$_bf_$d|2[013-9]|3[7-9])|[348]$_bf_$d$_bf_$d|5(?:0[1-9]|[1-9]$_bf_$d)|6(?:4[89]|6[67])|7(?:0[07]|7$_bf_$d|8[1-47-9]|9[0-36-9])|9(?:[01]9|9[0579])))$_bf_$d{4}\"},{\"i\":\"KN\",\"lbl\":\"Saint Kitts and Nevis\",\"img\":\"kn.png\",\"code\":\"+1\",\"ex\":\"8697652917\",\"ptrn\":\"869(?:48[89]|55[6-8]|66$_bf_$d|76[02-7])$_bf_$d{4}\"},{\"i\":\"KY\",\"lbl\":\"Cayman Islands (the)\",\"img\":\"ky.png\",\"code\":\"+1\",\"ex\":\"3453231234\",\"ptrn\":\"345(?:32[1-9]|42[0-4]|5(?:1[67]|2[5-79]|4[6-9]|50|76)|649|9(?:1[679]|2[2-9]|3[06-9]|90))$_bf_$d{4}\"},{\"i\":\"LC\",\"lbl\":\"Saint Lucia\",\"img\":\"lc.png\",\"code\":\"+1\",\"ex\":\"7582845678\",\"ptrn\":\"758(?:28[4-7]|384|4(?:6[01]|8[4-9])|5(?:1[89]|20|84)|7(?:1[2-9]|2$_bf_$d|3[0-3])|812)$_bf_$d{4}\"},{\"i\":\"MP\",\"lbl\":\"Northern Mariana Islands (the)\",\"img\":\"mp.png\",\"code\":\"+1\",\"ex\":\"6702345678\",\"ptrn\":\"670(?:2(?:3[3-7]|56|8[4-8])|32[1-38]|4(?:33|8[348])|5(?:32|55|88)|6(?:64|70|82)|78[3589]|8[3-9]8|989)$_bf_$d{4}\"},{\"i\":\"MS\",\"lbl\":\"Montserrat\",\"img\":\"ms.png\",\"code\":\"+1\",\"ex\":\"6644923456\",\"ptrn\":\"664(?:3(?:49|9[1-6])|49[2-6])$_bf_$d{4}\"},{\"i\":\"PR\",\"lbl\":\"Puerto Rico\",\"img\":\"pr.png\",\"code\":\"+1\",\"ex\":\"7872345678\",\"ptrn\":\"(?:787|939)[2-9]$_bf_$d{6}\"},{\"i\":\"SX\",\"lbl\":\"Sint Maarten (Dutch part)\",\"img\":\"sx.png\",\"code\":\"+1\",\"ex\":\"7215205678\",\"ptrn\":\"7215(?:1[02]|2$_bf_$d|5[034679]|8[014-8])$_bf_$d{4}\"},{\"i\":\"TC\",\"lbl\":\"Turks and Caicos Islands (the)\",\"img\":\"tc.png\",\"code\":\"+1\",\"ex\":\"6492311234\",\"ptrn\":\"649(?:2(?:3[129]|4[1-79])|3$_bf_$d$_bf_$d|4[34][1-3])$_bf_$d{4}\"},{\"i\":\"TT\",\"lbl\":\"Trinidad and Tobago\",\"img\":\"tt.png\",\"code\":\"+1\",\"ex\":\"8682911234\",\"ptrn\":\"868(?:(?:2[5-9]|3$_bf_$d)$_bf_$d|4(?:3[0-6]|[6-9]$_bf_$d)|6(?:20|78|8$_bf_$d)|7(?:0[1-9]|1[02-9]|[2-9]$_bf_$d))$_bf_$d{4}\"},{\"i\":\"VC\",\"lbl\":\"Saint Vincent and the Grenadines\",\"img\":\"vc.png\",\"code\":\"+1\",\"ex\":\"7844301234\",\"ptrn\":\"784(?:4(?:3[0-5]|5[45]|89|9[0-8])|5(?:2[6-9]|3[0-4])|720)$_bf_$d{4}\"},{\"i\":\"VG\",\"lbl\":\"Virgin Islands (British)\",\"img\":\"vg.png\",\"code\":\"+1\",\"ex\":\"2843001234\",\"ptrn\":\"284496[6-9]$_bf_$d{3}|284(?:245|3(?:0[0-3]|4[0-7]|68|9[34])|4(?:4[0-6]|68|99)|5(?:4[0-7]|68|9[69]))$_bf_$d{4}\"},{\"i\":\"VI\",\"lbl\":\"Virgin Islands (U.S.)\",\"img\":\"vi.png\",\"code\":\"+1\",\"ex\":\"3406421234\",\"ptrn\":\"340(?:2(?:0[0-368]|2[06-8]|4[49]|77)|3(?:32|44)|4(?:2[23]|44|7[34]|89)|5(?:1[34]|55)|6(?:2[56]|4[23]|77|9[023])|7(?:1[2-57-9]|2[57]|7$_bf_$d)|884|998)$_bf_$d{4}\"},{\"i\":\"AD\",\"lbl\":\"Andorra\",\"img\":\"ad.png\",\"code\":\"+376\",\"ex\":\"312345\",\"frmt\":\"+c ## ### ### ##\",\"ptrn\":\"690$_bf_$d{6}|[356]$_bf_$d{5}\"},{\"i\":\"AE\",\"lbl\":\"United Arab Emirates (the)\",\"img\":\"ae.png\",\"code\":\"+971\",\"ex\":\"501234567\",\"ptrn\":\"5[024-68]$_bf_$d{7}\"},{\"i\":\"AF\",\"lbl\":\"Afghanistan\",\"img\":\"af.png\",\"code\":\"+93\",\"ex\":\"701234567\",\"ptrn\":\"7$_bf_$d{8}\"},{\"i\":\"AL\",\"lbl\":\"Albania\",\"img\":\"al.png\",\"code\":\"+355\",\"ex\":\"672123456\",\"ptrn\":\"6(?:[78][2-9]|9$_bf_$d)$_bf_$d{6}\"},{\"i\":\"AM\",\"lbl\":\"Armenia\",\"img\":\"am.png\",\"code\":\"+374\",\"ex\":\"77123456\",\"ptrn\":\"(?:33|4[1349]|55|77|88|9[13-9])$_bf_$d{6}\"},{\"i\":\"AO\",\"lbl\":\"Angola\",\"img\":\"ao.png\",\"code\":\"+244\",\"ex\":\"923123456\",\"ptrn\":\"9[1-49]$_bf_$d{7}\"},{\"i\":\"AR\",\"lbl\":\"Argentina\",\"img\":\"ar.png\",\"code\":\"+54\",\"ex\":\"91123456789\",\"ptrn\":\"93888[013-9]$_bf_$d{5}|9(?:29(?:54|66)|3(?:777|865))[2-8]$_bf_$d{5}|93(?:7(?:1[15]|81)|8(?:21|4[16]|69|9[12]))[46]$_bf_$d{5}|9(?:2(?:2(?:2[59]|44|52)|3(?:26|44)|473|9(?:[07]2|2[26]|34|46))|3327)[45]$_bf_$d{5}|9(?:2(?:284|302|657|920)|3(?:4(?:8[27]|92)|541|755|878))[2-7]$_bf_$d{5}|9(?:2(?:(?:26|62)2|32[03]|477|9(?:42|83))|3(?:329|4(?:[47]6|62|89)|564))[2-6]$_bf_$d{5}|(?:675$_bf_$d|9(?:11[1-8]$_bf_$d|2(?:2(?:0[45]|1[2-6]|3[3-6])|3(?:[06]4|7[45])|494|6(?:04|1[2-8]|[36][45]|4[3-6])|80[45]|9(?:[17][4-6]|[48][45]|9[3-6]))|3(?:364|4(?:1[2-7]|[235][4-6]|84)|5(?:1[2-8]|[38][4-6])|6(?:2[45]|44)|7[069][45]|8(?:[03][45]|[17][2-6]|[58][3-6]))))$_bf_$d{6}|92(?:2(?:21|4[23]|6[145]|7[1-4]|8[356]|9[267])|3(?:16|3[13-8]|43|5[346-8]|9[3-5])|475|6(?:2[46]|4[78]|5[1568])|9(?:03|2[1457-9]|3[1356]|4[08]|[56][23]|82))4$_bf_$d{5}|9(?:2(?:2(?:57|81)|3(?:24|46|92)|9(?:01|23|64))|3(?:4(?:42|71)|5(?:25|37|4[347]|71)|7(?:18|5[17])))[3-6]$_bf_$d{5}|9(?:2(?:2(?:02|2[3467]|4[156]|5[45]|6[6-8]|91)|3(?:1[47]|25|[45][25]|96)|47[48]|625|932)|3(?:38[2578]|4(?:0[0-24-9]|3[78]|4[457]|58|6[03-9]|72|83|9[136-8])|5(?:2[124]|[368][23]|4[2689]|7[2-6])|7(?:16|2[15]|3[145]|4[13]|5[468]|7[2-5]|8[26])|8(?:2[5-7]|3[278]|4[3-5]|5[78]|6[1-378]|[78]7|94)))[4-6]$_bf_$d{5}\"},{\"i\":\"AT\",\"lbl\":\"Austria\",\"img\":\"at.png\",\"code\":\"+43\",\"ex\":\"664123456\",\"ptrn\":\"6(?:5[0-3579]|6[013-9]|[7-9]$_bf_$d)$_bf_$d{4,10}\"},{\"i\":\"AU\",\"lbl\":\"Australia\",\"img\":\"au.png\",\"code\":\"+61\",\"ex\":\"412345678\",\"ptrn\":\"4(?:83[0-38]|93[0-6])$_bf_$d{5}|4(?:[0-3]$_bf_$d|4[047-9]|5[0-25-9]|6[06-9]|7[02-9]|8[0-24-9]|9[0-27-9])$_bf_$d{6}\"},{\"i\":\"CC\",\"lbl\":\"Cocos (Keeling) Islands (the)\",\"img\":\"cc.png\",\"code\":\"+61\",\"ex\":\"412345678\",\"ptrn\":\"4(?:83[0-38]|93[0-6])$_bf_$d{5}|4(?:[0-3]$_bf_$d|4[047-9]|5[0-25-9]|6[06-9]|7[02-9]|8[0-24-9]|9[0-27-9])$_bf_$d{6}\"},{\"i\":\"CX\",\"lbl\":\"Christmas Island\",\"img\":\"cx.png\",\"code\":\"+61\",\"ex\":\"412345678\",\"ptrn\":\"4(?:83[0-38]|93[0-6])$_bf_$d{5}|4(?:[0-3]$_bf_$d|4[047-9]|5[0-25-9]|6[06-9]|7[02-9]|8[0-24-9]|9[0-27-9])$_bf_$d{6}\"},{\"i\":\"AW\",\"lbl\":\"Aruba\",\"img\":\"aw.png\",\"code\":\"+297\",\"ex\":\"5601234\",\"ptrn\":\"(?:290|5[69]$_bf_$d|6(?:[03]0|22|4[0-2]|[69]$_bf_$d)|7(?:[34]$_bf_$d|7[07])|9(?:6[45]|9[4-8]))$_bf_$d{4}\"},{\"i\":\"AX\",\"lbl\":\"\\u00c5land Islands\",\"img\":\"ax.png\",\"code\":\"+358\",\"ex\":\"412345678\",\"ptrn\":\"4946$_bf_$d{2,6}|(?:4[0-8]|50)$_bf_$d{4,8}\"},{\"i\":\"FI\",\"lbl\":\"Finland\",\"img\":\"fi.png\",\"code\":\"+358\",\"ex\":\"412345678\",\"ptrn\":\"4946$_bf_$d{2,6}|(?:4[0-8]|50)$_bf_$d{4,8}\"},{\"i\":\"AZ\",\"lbl\":\"Azerbaijan\",\"img\":\"az.png\",\"code\":\"+994\",\"ex\":\"401234567\",\"ptrn\":\"36554$_bf_$d{4}|(?:[16]0|4[04]|5[015]|7[07]|99)$_bf_$d{7}\"},{\"i\":\"BA\",\"lbl\":\"Bosnia and Herzegovina\",\"img\":\"ba.png\",\"code\":\"+387\",\"ex\":\"61123456\",\"ptrn\":\"6040$_bf_$d{5}|6(?:03|[1-356]|44|7$_bf_$d)$_bf_$d{6}\"},{\"i\":\"BD\",\"lbl\":\"Bangladesh\",\"img\":\"bd.png\",\"code\":\"+880\",\"ex\":\"1812345678\",\"ptrn\":\"(?:1[13-9]$_bf_$d|644)$_bf_$d{7}|(?:3[78]|44|66)[02-9]$_bf_$d{7}\"},{\"i\":\"BE\",\"lbl\":\"Belgium\",\"img\":\"be.png\",\"code\":\"+32\",\"ex\":\"470123456\",\"ptrn\":\"4[5-9]$_bf_$d{7}\"},{\"i\":\"BF\",\"lbl\":\"Burkina Faso\",\"img\":\"bf.png\",\"code\":\"+226\",\"ex\":\"70123456\",\"ptrn\":\"(?:0[1267]|5[1-8]|[67]$_bf_$d)$_bf_$d{6}\"},{\"i\":\"BG\",\"lbl\":\"Bulgaria\",\"img\":\"bg.png\",\"code\":\"+359\",\"ex\":\"48123456\",\"ptrn\":\"43[07-9]$_bf_$d{5}|(?:48|8[7-9]$_bf_$d|9(?:8$_bf_$d|9[69]))$_bf_$d{6}\"},{\"i\":\"BH\",\"lbl\":\"Bahrain\",\"img\":\"bh.png\",\"code\":\"+973\",\"ex\":\"36001234\",\"ptrn\":\"(?:3(?:[1-79]$_bf_$d|8[0-47-9])$_bf_$d|6(?:3(?:00|33|6[16])|6(?:3[03-9]|[69]$_bf_$d|7[0-6])))$_bf_$d{4}\"},{\"i\":\"BI\",\"lbl\":\"Burundi\",\"img\":\"bi.png\",\"code\":\"+257\",\"ex\":\"79561234\",\"ptrn\":\"(?:29|31|6[1289]|7[125-9])$_bf_$d{6}\"},{\"i\":\"BJ\",\"lbl\":\"Benin\",\"img\":\"bj.png\",\"code\":\"+229\",\"ex\":\"90011234\",\"ptrn\":\"(?:5[1-35-8]|6$_bf_$d|9[013-9])$_bf_$d{6}\"},{\"i\":\"BL\",\"lbl\":\"Saint Barth\\u00e9lemy\",\"img\":\"bl.png\",\"code\":\"+590\",\"ex\":\"690001234\",\"ptrn\":\"69(?:0$_bf_$d$_bf_$d|1(?:2[2-9]|3[0-5]))$_bf_$d{4}\"},{\"i\":\"GP\",\"lbl\":\"Guadeloupe\",\"img\":\"gp.png\",\"code\":\"+590\",\"ex\":\"690001234\",\"ptrn\":\"69(?:0$_bf_$d$_bf_$d|1(?:2[2-9]|3[0-5]))$_bf_$d{4}\"},{\"i\":\"MF\",\"lbl\":\"Saint Martin (French part)\",\"img\":\"mf.png\",\"code\":\"+590\",\"ex\":\"690001234\",\"ptrn\":\"69(?:0$_bf_$d$_bf_$d|1(?:2[2-9]|3[0-5]))$_bf_$d{4}\"},{\"i\":\"BN\",\"lbl\":\"Brunei Darussalam\",\"img\":\"bn.png\",\"code\":\"+673\",\"ex\":\"7123456\",\"ptrn\":\"(?:22[89]|[78]$_bf_$d$_bf_$d)$_bf_$d{4}\"},{\"i\":\"BO\",\"lbl\":\"Bolivia (Plurinational State of)\",\"img\":\"bo.png\",\"code\":\"+591\",\"ex\":\"71234567\",\"ptrn\":\"[67]$_bf_$d{7}\"},{\"i\":\"BQ\",\"lbl\":\"Bonaire, Sint Eustatius and Saba\",\"img\":\"bq.png\",\"code\":\"+599\",\"ex\":\"3181234\",\"ptrn\":\"(?:31(?:8[14-8]|9[14578])|416[14-9]|7(?:0[01]|7[07]|8$_bf_$d|9[056])$_bf_$d)$_bf_$d{3}\"},{\"i\":\"CW\",\"lbl\":\"Cura\\u00e7ao\",\"img\":\"cw.png\",\"code\":\"+599\",\"ex\":\"95181234\",\"ptrn\":\"953[01]$_bf_$d{4}|9(?:5[12467]|6[5-9])$_bf_$d{5}\"},{\"i\":\"BR\",\"lbl\":\"Brazil\",\"img\":\"br.png\",\"code\":\"+55\",\"ex\":\"11961234567\",\"ptrn\":\"(?:[14689][1-9]|2[12478]|3[1-578]|5[13-5]|7[13-579])(?:7|9$_bf_$d)$_bf_$d{7}\"},{\"i\":\"BT\",\"lbl\":\"Bhutan\",\"img\":\"bt.png\",\"code\":\"+975\",\"ex\":\"17123456\",\"ptrn\":\"(?:1[67]|77)$_bf_$d{6}\"},{\"i\":\"BW\",\"lbl\":\"Botswana\",\"img\":\"bw.png\",\"code\":\"+267\",\"ex\":\"71123456\",\"ptrn\":\"(?:321|7(?:[1-7]$_bf_$d|8[01]))$_bf_$d{5}\"},{\"i\":\"BY\",\"lbl\":\"Belarus\",\"img\":\"by.png\",\"code\":\"+375\",\"ex\":\"294911911\",\"ptrn\":\"(?:2(?:5[5-79]|9[1-9])|(?:33|44)$_bf_$d)$_bf_$d{6}\"},{\"i\":\"BZ\",\"lbl\":\"Belize\",\"img\":\"bz.png\",\"code\":\"+501\",\"ex\":\"6221234\",\"ptrn\":\"6[0-35-7]$_bf_$d{5}\"},{\"i\":\"CD\",\"lbl\":\"Congo (the Democratic Republic of the)\",\"img\":\"cd.png\",\"code\":\"+243\",\"ex\":\"991234567\",\"ptrn\":\"88$_bf_$d{5}|(?:8[0-59]|9[017-9])$_bf_$d{7}\"},{\"i\":\"CF\",\"lbl\":\"Central African Republic (the)\",\"img\":\"cf.png\",\"code\":\"+236\",\"ex\":\"70012345\",\"ptrn\":\"7[0257]$_bf_$d{6}\"},{\"i\":\"CG\",\"lbl\":\"Congo (the)\",\"img\":\"cg.png\",\"code\":\"+242\",\"ex\":\"061234567\",\"ptrn\":\"026(?:1[0-5]|6[6-9])$_bf_$d{4}|0(?:[14-6]$_bf_$d$_bf_$d|2(?:40|5[5-8]|6[07-9]))$_bf_$d{5}\"},{\"i\":\"CH\",\"lbl\":\"Switzerland\",\"img\":\"ch.png\",\"code\":\"+41\",\"ex\":\"781234567\",\"ptrn\":\"7[35-9]$_bf_$d{7}\"},{\"i\":\"CI\",\"lbl\":\"C\\u00f4te d'Ivoire\",\"img\":\"ci.png\",\"code\":\"+225\",\"ex\":\"0123456789\",\"ptrn\":\"0704[0-7]$_bf_$d{5}|0(?:[15]$_bf_$d$_bf_$d|7(?:0[0-37-9]|[4-9][7-9]))$_bf_$d{6}\"},{\"i\":\"CK\",\"lbl\":\"Cook Islands (the)\",\"img\":\"ck.png\",\"code\":\"+682\",\"ex\":\"71234\",\"ptrn\":\"[578]$_bf_$d{4}\"},{\"i\":\"CL\",\"lbl\":\"Chile\",\"img\":\"cl.png\",\"code\":\"+56\",\"ex\":\"221234567\",\"ptrn\":\"2(?:1982[0-6]|3314[05-9])$_bf_$d{3}|(?:2(?:1(?:160|962)|3(?:2$_bf_$d$_bf_$d|3(?:[03467]$_bf_$d|1[0-35-9]|2[1-9]|5[0-24-9]|8[0-3])|600)|646[59])|80[1-9]$_bf_$d$_bf_$d|9(?:3(?:[0-57-9]$_bf_$d$_bf_$d|6(?:0[02-9]|[1-9]$_bf_$d))|6(?:[0-8]$_bf_$d$_bf_$d|9(?:[02-79]$_bf_$d|1[05-9]))|7[1-9]$_bf_$d$_bf_$d|9(?:[03-9]$_bf_$d$_bf_$d|1(?:[0235-9]$_bf_$d|4[0-24-9])|2(?:[0-79]$_bf_$d|8[0-46-9]))))$_bf_$d{4}|(?:22|3[2-5]|[47][1-35]|5[1-3578]|6[13-57]|8[1-9]|9[2458])$_bf_$d{7}\"},{\"i\":\"CM\",\"lbl\":\"Cameroon\",\"img\":\"cm.png\",\"code\":\"+237\",\"ex\":\"671234567\",\"ptrn\":\"(?:24[23]|6[5-9]$_bf_$d)$_bf_$d{6}\"},{\"i\":\"CN\",\"lbl\":\"China\",\"img\":\"cn.png\",\"code\":\"+86\",\"ex\":\"13123456789\",\"ptrn\":\"1740[0-5]$_bf_$d{6}|1(?:[38]$_bf_$d|4[57]|5[0-35-9]|6[25-7]|7[0-35-8]|9[0135-9])$_bf_$d{8}\"},{\"i\":\"CO\",\"lbl\":\"Colombia\",\"img\":\"co.png\",\"code\":\"+57\",\"ex\":\"3211234567\",\"ptrn\":\"3333(?:0(?:0$_bf_$d|1[0-5])|[4-9]$_bf_$d$_bf_$d)$_bf_$d{3}|(?:3(?:24[2-6]|3(?:00|3[0-24-9]))|9101)$_bf_$d{6}|3(?:0[0-5]|1$_bf_$d|2[0-3]|5[01]|70)$_bf_$d{7}\"},{\"i\":\"CR\",\"lbl\":\"Costa Rica\",\"img\":\"cr.png\",\"code\":\"+506\",\"ex\":\"83123456\",\"ptrn\":\"(?:3005$_bf_$d|6500[01])$_bf_$d{3}|(?:5[07]|6[0-4]|7[0-3]|8[3-9])$_bf_$d{6}\"},{\"i\":\"CU\",\"lbl\":\"Cuba\",\"img\":\"cu.png\",\"code\":\"+53\",\"ex\":\"51234567\",\"ptrn\":\"5$_bf_$d{7}\"},{\"i\":\"CV\",\"lbl\":\"Cabo Verde\",\"img\":\"cv.png\",\"code\":\"+238\",\"ex\":\"9911234\",\"ptrn\":\"(?:[34][36]|5[0-389])$_bf_$d{5}\"},{\"i\":\"CY\",\"lbl\":\"Cyprus\",\"img\":\"cy.png\",\"code\":\"+357\",\"ex\":\"96123456\",\"ptrn\":\"9[4-79]$_bf_$d{6}\"},{\"i\":\"CZ\",\"lbl\":\"Czechia\",\"img\":\"cz.png\",\"code\":\"+420\",\"ex\":\"601123456\",\"ptrn\":\"(?:60[1-8]|7(?:0[2-5]|[2379]$_bf_$d))$_bf_$d{6}\"},{\"i\":\"DE\",\"lbl\":\"Germany\",\"img\":\"de.png\",\"code\":\"+49\",\"ex\":\"15123456789\",\"ptrn\":\"15[0-25-9]$_bf_$d{8}|1(?:6[023]|7$_bf_$d)$_bf_$d{7,8}\"},{\"i\":\"DJ\",\"lbl\":\"Djibouti\",\"img\":\"dj.png\",\"code\":\"+253\",\"ex\":\"77831001\",\"ptrn\":\"77$_bf_$d{6}\"},{\"i\":\"DK\",\"lbl\":\"Denmark\",\"img\":\"dk.png\",\"code\":\"+45\",\"ex\":\"32123456\",\"ptrn\":\"(?:[2-7]$_bf_$d|8[126-9]|9[1-46-9])$_bf_$d{6}\"},{\"i\":\"DZ\",\"lbl\":\"Algeria\",\"img\":\"dz.png\",\"code\":\"+213\",\"ex\":\"551234567\",\"ptrn\":\"(?:5(?:4[0-29]|5$_bf_$d|6[0-2])|6(?:[569]$_bf_$d|7[0-6])|7[7-9]$_bf_$d)$_bf_$d{6}\"},{\"i\":\"EC\",\"lbl\":\"Ecuador\",\"img\":\"ec.png\",\"code\":\"+593\",\"ex\":\"991234567\",\"ptrn\":\"964[0-2]$_bf_$d{5}|9(?:39|[57][89]|6[0-36-9]|[89]$_bf_$d)$_bf_$d{6}\"},{\"i\":\"EE\",\"lbl\":\"Estonia\",\"img\":\"ee.png\",\"code\":\"+372\",\"ex\":\"51234567\",\"ptrn\":\"5(?:[0-35-9]$_bf_$d{6}|4(?:[0-57-9]$_bf_$d{5}|6(?:[0-24-9]$_bf_$d{4}|3(?:[0-35-9]$_bf_$d{3}|4000))))|8(?:1(?:0(?:000|[3-9]$_bf_$d$_bf_$d)|(?:1(?:0[236]|1$_bf_$d)|(?:23|[3-79]$_bf_$d)$_bf_$d)$_bf_$d)|2(?:0(?:000|(?:19|[24-7]$_bf_$d)$_bf_$d)|(?:(?:[124-6]$_bf_$d|3[5-9])$_bf_$d|7(?:[679]$_bf_$d|8[13-9])|8(?:[2-6]$_bf_$d|7[01]))$_bf_$d)|[349]$_bf_$d{4})$_bf_$d$_bf_$d|5(?:(?:[02]$_bf_$d|5[0-478])$_bf_$d|1(?:[0-8]$_bf_$d|95)|6(?:4[0-4]|5[1-589]))$_bf_$d{3}\"},{\"i\":\"EG\",\"lbl\":\"Egypt\",\"img\":\"eg.png\",\"code\":\"+20\",\"ex\":\"1001234567\",\"ptrn\":\"1[0-25]$_bf_$d{8}\"},{\"i\":\"EH\",\"lbl\":\"Western Sahara\",\"img\":\"eh.png\",\"code\":\"+212\",\"ex\":\"650123456\",\"ptrn\":\"(?:6(?:[0-79]$_bf_$d|8[0-247-9])|7(?:0$_bf_$d|1[0-5]|6[1267]|7[0-57]))$_bf_$d{6}\"},{\"i\":\"MA\",\"lbl\":\"Morocco\",\"img\":\"ma.png\",\"code\":\"+212\",\"ex\":\"650123456\",\"ptrn\":\"(?:6(?:[0-79]$_bf_$d|8[0-247-9])|7(?:0$_bf_$d|1[0-5]|6[1267]|7[0-57]))$_bf_$d{6}\"},{\"i\":\"ER\",\"lbl\":\"Eritrea\",\"img\":\"er.png\",\"code\":\"+291\",\"ex\":\"7123456\",\"ptrn\":\"(?:17[1-3]|7$_bf_$d$_bf_$d)$_bf_$d{4}\"},{\"i\":\"ES\",\"lbl\":\"Spain\",\"img\":\"es.png\",\"code\":\"+34\",\"ex\":\"612345678\",\"ptrn\":\"(?:590[16]00$_bf_$d|9(?:6906(?:09|10)|7390$_bf_$d$_bf_$d))$_bf_$d$_bf_$d|(?:6$_bf_$d|7[1-48])$_bf_$d{7}\"},{\"i\":\"ET\",\"lbl\":\"Ethiopia\",\"img\":\"et.png\",\"code\":\"+251\",\"ex\":\"911234567\",\"ptrn\":\"9$_bf_$d{8}\"},{\"i\":\"FJ\",\"lbl\":\"Fiji\",\"img\":\"fj.png\",\"code\":\"+679\",\"ex\":\"7012345\",\"ptrn\":\"(?:[279]$_bf_$d|45|5[01568]|8[034679])$_bf_$d{5}\"},{\"i\":\"FK\",\"lbl\":\"Falkland Islands (the) [Malvinas]\",\"img\":\"fk.png\",\"code\":\"+500\",\"ex\":\"51234\",\"ptrn\":\"[56]$_bf_$d{4}\"},{\"i\":\"FM\",\"lbl\":\"Micronesia (Federated States of)\",\"img\":\"fm.png\",\"code\":\"+691\",\"ex\":\"3501234\",\"ptrn\":\"31(?:00[67]|208|309)$_bf_$d$_bf_$d|(?:3(?:[2357]0[1-9]|602|804|905)|(?:820|9[2-7]$_bf_$d)$_bf_$d)$_bf_$d{3}\"},{\"i\":\"FO\",\"lbl\":\"Faroe Islands (the)\",\"img\":\"fo.png\",\"code\":\"+298\",\"ex\":\"211234\",\"ptrn\":\"(?:[27][1-9]|5$_bf_$d|91)$_bf_$d{4}\"},{\"i\":\"FR\",\"lbl\":\"France\",\"img\":\"fr.png\",\"code\":\"+33\",\"ex\":\"612345678\",\"ptrn\":\"(?:6(?:[0-24-8]$_bf_$d|3[0-8]|9[589])|7(?:00|[3-9]$_bf_$d))$_bf_$d{6}\"},{\"i\":\"GA\",\"lbl\":\"Gabon\",\"img\":\"ga.png\",\"code\":\"+241\",\"ex\":\"06031234\",\"ptrn\":\"(?:0[2-7]|6[256]|7[47])$_bf_$d{6}|[2-7]$_bf_$d{6}\"},{\"i\":\"GB\",\"lbl\":\"United Kingdom of Great Britain and Northern Ireland (the)\",\"img\":\"gb.png\",\"code\":\"+44\",\"ex\":\"7400123456\",\"ptrn\":\"7(?:457[0-57-9]|700[01]|911[028])$_bf_$d{5}|7(?:[1-3]$_bf_$d$_bf_$d|4(?:[0-46-9]$_bf_$d|5[0-689])|5(?:0[0-8]|[13-9]$_bf_$d|2[0-35-9])|7(?:0[1-9]|[1-7]$_bf_$d|8[02-9]|9[0-689])|8(?:[014-9]$_bf_$d|[23][0-8])|9(?:[024-9]$_bf_$d|1[02-9]|3[0-689]))$_bf_$d{6}\"},{\"i\":\"GG\",\"lbl\":\"Guernsey\",\"img\":\"gg.png\",\"code\":\"+44\",\"ex\":\"7781123456\",\"ptrn\":\"7(?:(?:781|839)$_bf_$d|911[17])$_bf_$d{5}\"},{\"i\":\"IM\",\"lbl\":\"Isle of Man\",\"img\":\"im.png\",\"code\":\"+44\",\"ex\":\"7924123456\",\"ptrn\":\"76245[06]$_bf_$d{4}|7(?:4576|[59]24$_bf_$d|624[0-4689])$_bf_$d{5}\"},{\"i\":\"JE\",\"lbl\":\"Jersey\",\"img\":\"je.png\",\"code\":\"+44\",\"ex\":\"7797712345\",\"ptrn\":\"7(?:(?:(?:50|82)9|937)$_bf_$d|7(?:00[378]|97[7-9]))$_bf_$d{5}\"},{\"i\":\"GE\",\"lbl\":\"Georgia\",\"img\":\"ge.png\",\"code\":\"+995\",\"ex\":\"555123456\",\"ptrn\":\"5(?:(?:0555|1177)[5-9]|757(?:7[7-9]|8[01]))$_bf_$d{3}|5(?:0070|(?:11|33)33|[25]222)[0-4]$_bf_$d{3}|5(?:00(?:0$_bf_$d|50)|11(?:00|1$_bf_$d|2[0-4])|5200|75(?:00|[57]5)|8(?:0(?:[01]$_bf_$d|2[0-4])|58[89]|8(?:55|88)))$_bf_$d{4}|(?:5(?:[14]4|5[0157-9]|68|7[0147-9]|9[1-35-9])|790)$_bf_$d{6}\"},{\"i\":\"GF\",\"lbl\":\"French Guiana\",\"img\":\"gf.png\",\"code\":\"+594\",\"ex\":\"694201234\",\"ptrn\":\"694(?:[0-249]$_bf_$d|3[0-48])$_bf_$d{4}\"},{\"i\":\"GH\",\"lbl\":\"Ghana\",\"img\":\"gh.png\",\"code\":\"+233\",\"ex\":\"231234567\",\"ptrn\":\"(?:2(?:[0346-8]$_bf_$d|5[67])|5(?:[0457]$_bf_$d|6[01]|9[1-9]))$_bf_$d{6}\"},{\"i\":\"GI\",\"lbl\":\"Gibraltar\",\"img\":\"gi.png\",\"code\":\"+350\",\"ex\":\"57123456\",\"ptrn\":\"(?:5[146-8]$_bf_$d|606)$_bf_$d{5}\"},{\"i\":\"GL\",\"lbl\":\"Greenland\",\"img\":\"gl.png\",\"code\":\"+299\",\"ex\":\"221234\",\"ptrn\":\"[245]$_bf_$d{5}\"},{\"i\":\"GM\",\"lbl\":\"Gambia (the)\",\"img\":\"gm.png\",\"code\":\"+220\",\"ex\":\"3012345\",\"ptrn\":\"(?:[23679]$_bf_$d|5[0-389])$_bf_$d{5}\"},{\"i\":\"GN\",\"lbl\":\"Guinea\",\"img\":\"gn.png\",\"code\":\"+224\",\"ex\":\"601123456\",\"ptrn\":\"6[0-356]$_bf_$d{7}\"},{\"i\":\"GQ\",\"lbl\":\"Equatorial Guinea\",\"img\":\"gq.png\",\"code\":\"+240\",\"ex\":\"222123456\",\"ptrn\":\"(?:222|55$_bf_$d)$_bf_$d{6}\"},{\"i\":\"GR\",\"lbl\":\"Greece\",\"img\":\"gr.png\",\"code\":\"+30\",\"ex\":\"6912345678\",\"ptrn\":\"68[57-9]$_bf_$d{7}|(?:69|94)$_bf_$d{8}\"},{\"i\":\"GT\",\"lbl\":\"Guatemala\",\"img\":\"gt.png\",\"code\":\"+502\",\"ex\":\"51234567\",\"ptrn\":\"[3-5]$_bf_$d{7}\"},{\"i\":\"GW\",\"lbl\":\"Guinea-Bissau\",\"img\":\"gw.png\",\"code\":\"+245\",\"ex\":\"955012345\",\"ptrn\":\"9(?:5$_bf_$d|6[569]|77)$_bf_$d{6}\"},{\"i\":\"GY\",\"lbl\":\"Guyana\",\"img\":\"gy.png\",\"code\":\"+592\",\"ex\":\"6091234\",\"ptrn\":\"6$_bf_$d{6}\"},{\"i\":\"HK\",\"lbl\":\"Hong Kong\",\"img\":\"hk.png\",\"code\":\"+852\",\"ex\":\"51234567\",\"ptrn\":\"(?:46(?:[07][0-7]|1[0-6]|4[0-57-9]|5[0-8]|6[0-4])|5730|6(?:26[013-7]|66[0-3])|70(?:7[1-5]|8[0-4])|848[015-9]|929[03-9])$_bf_$d{4}|(?:46[238]|5(?:[1-59][0-46-9]|6[0-4689]|7[0-2469])|6(?:0[1-9]|[13-59]$_bf_$d|[268][0-57-9]|7[0-79])|84[09]|9(?:0[1-9]|1[02-9]|[2358][0-8]|[467]$_bf_$d))$_bf_$d{5}\"},{\"i\":\"HN\",\"lbl\":\"Honduras\",\"img\":\"hn.png\",\"code\":\"+504\",\"ex\":\"91234567\",\"ptrn\":\"[37-9]$_bf_$d{7}\"},{\"i\":\"HR\",\"lbl\":\"Croatia\",\"img\":\"hr.png\",\"code\":\"+385\",\"ex\":\"921234567\",\"ptrn\":\"9(?:751$_bf_$d{5}|8$_bf_$d{6,7})|9(?:0[1-9]|[1259]$_bf_$d|7[0679])$_bf_$d{6}\"},{\"i\":\"HT\",\"lbl\":\"Haiti\",\"img\":\"ht.png\",\"code\":\"+509\",\"ex\":\"34101234\",\"ptrn\":\"[34]$_bf_$d{7}\"},{\"i\":\"HU\",\"lbl\":\"Hungary\",\"img\":\"hu.png\",\"code\":\"+36\",\"ex\":\"201234567\",\"ptrn\":\"(?:[257]0|3[01])$_bf_$d{7}\"},{\"i\":\"ID\",\"lbl\":\"Indonesia\",\"img\":\"id.png\",\"code\":\"+62\",\"ex\":\"812345678\",\"ptrn\":\"8[1-35-9]$_bf_$d{7,10}\"},{\"i\":\"IE\",\"lbl\":\"Ireland\",\"img\":\"ie.png\",\"code\":\"+353\",\"ex\":\"850123456\",\"ptrn\":\"8(?:22|[35-9]$_bf_$d)$_bf_$d{6}\"},{\"i\":\"IL\",\"lbl\":\"Israel\",\"img\":\"il.png\",\"code\":\"+972\",\"ex\":\"502345678\",\"ptrn\":\"5(?:(?:[02368]$_bf_$d|[19][2-9]|4[1-9])$_bf_$d|5(?:01|1[79]|2[2-9]|3[0-3]|4[34]|5[015689]|6[6-8]|7[0-267]|8[7-9]|9[1-9]))$_bf_$d{5}\"},{\"i\":\"IN\",\"lbl\":\"India\",\"img\":\"in.png\",\"code\":\"+91\",\"ex\":\"8123456789\",\"ptrn\":\"(?:61279|7(?:887[02-9]|9(?:313|79[07-9]))|8(?:079[04-9]|(?:84|91)7[02-8]))$_bf_$d{5}|(?:6(?:12|[2-47]1|5[17]|6[13]|80)[0189]|7(?:1(?:2[0189]|9[0-5])|2(?:[14][017-9]|8[0-59])|3(?:2[5-8]|[34][017-9]|9[016-9])|4(?:1[015-9]|[29][89]|39|8[389])|5(?:[15][017-9]|2[04-9]|9[7-9])|6(?:0[0-47]|1[0-257-9]|2[0-4]|3[19]|5[4589])|70[0289]|88[089]|97[02-8])|8(?:0(?:6[67]|7[02-8])|70[017-9]|84[01489]|91[0-289]))$_bf_$d{6}|(?:7(?:31|4[47])|8(?:16|2[014]|3[126]|6[136]|7[78]|83))(?:[0189]$_bf_$d|7[02-8])$_bf_$d{5}|(?:6(?:[09]$_bf_$d|1[04679]|2[03689]|3[05-9]|4[0489]|50|6[069]|7[07]|8[7-9])|7(?:0$_bf_$d|2[0235-79]|3[05-8]|40|5[0346-8]|6[6-9]|7[1-9]|8[0-79]|9[089])|8(?:0[01589]|1[0-57-9]|2[235-9]|3[03-57-9]|[45]$_bf_$d|6[02457-9]|7[1-69]|8[0-25-9]|9[02-9])|9$_bf_$d$_bf_$d)$_bf_$d{7}|(?:6(?:(?:1[1358]|2[2457]|3[2-4]|4[235-7]|5[2-689]|6[24578]|8[124-6])$_bf_$d|7(?:[235689]$_bf_$d|4[0189]))|7(?:1(?:[013-8]$_bf_$d|9[6-9])|28[6-8]|3(?:2[0-49]|9[2-5])|4(?:1[2-4]|[29][0-7]|3[0-8]|[56]$_bf_$d|8[0-24-7])|5(?:2[1-3]|9[0-6])|6(?:0[5689]|2[5-9]|3[02-8]|4$_bf_$d|5[0-367])|70[13-7]|881))[0189]$_bf_$d{5}\"},{\"i\":\"IO\",\"lbl\":\"British Indian Ocean Territory (the)\",\"img\":\"io.png\",\"code\":\"+246\",\"ex\":\"3801234\",\"ptrn\":\"38$_bf_$d{5}\"},{\"i\":\"IQ\",\"lbl\":\"Iraq\",\"img\":\"iq.png\",\"code\":\"+964\",\"ex\":\"7912345678\",\"ptrn\":\"7[3-9]$_bf_$d{8}\"},{\"i\":\"IR\",\"lbl\":\"Iran (Islamic Republic of)\",\"img\":\"ir.png\",\"code\":\"+98\",\"ex\":\"9123456789\",\"ptrn\":\"9(?:(?:0(?:[0-35]$_bf_$d|4[4-6])|(?:[13]$_bf_$d|2[0-3])$_bf_$d)$_bf_$d|9(?:(?:[0-3]$_bf_$d|4[0145])$_bf_$d|5[15]0|8(?:1$_bf_$d|88)|9(?:0[013]|[19]$_bf_$d|21|77|8[7-9])))$_bf_$d{5}\"},{\"i\":\"IS\",\"lbl\":\"Iceland\",\"img\":\"is.png\",\"code\":\"+354\",\"ex\":\"6111234\",\"ptrn\":\"(?:38[589]$_bf_$d$_bf_$d|6(?:1[1-8]|2[0-6]|3[027-9]|4[014679]|5[0159]|6[0-69]|70|8[06-8]|9$_bf_$d)|7(?:5[057]|[6-9]$_bf_$d)|8(?:2[0-59]|[3-69]$_bf_$d|8[28]))$_bf_$d{4}\"},{\"i\":\"IT\",\"lbl\":\"Italy\",\"img\":\"it.png\",\"code\":\"+39\",\"ex\":\"3123456789\",\"ptrn\":\"3[1-9]$_bf_$d{8}|3[2-9]$_bf_$d{7}\"},{\"i\":\"VA\",\"lbl\":\"Holy See (the)\",\"img\":\"va.png\",\"code\":\"+39\",\"ex\":\"3123456789\",\"ptrn\":\"3[1-9]$_bf_$d{8}|3[2-9]$_bf_$d{7}\"},{\"i\":\"JO\",\"lbl\":\"Jordan\",\"img\":\"jo.png\",\"code\":\"+962\",\"ex\":\"790123456\",\"ptrn\":\"7(?:[78][0-25-9]|9$_bf_$d)$_bf_$d{6}\"},{\"i\":\"JP\",\"lbl\":\"Japan\",\"img\":\"jp.png\",\"code\":\"+81\",\"ex\":\"9012345678\",\"ptrn\":\"[7-9]0[1-9]$_bf_$d{7}\"},{\"i\":\"KE\",\"lbl\":\"Kenya\",\"img\":\"ke.png\",\"code\":\"+254\",\"ex\":\"712123456\",\"ptrn\":\"(?:1(?:0[0-6]|1[0-5]|2[014])|7$_bf_$d$_bf_$d)$_bf_$d{6}\"},{\"i\":\"KG\",\"lbl\":\"Kyrgyzstan\",\"img\":\"kg.png\",\"code\":\"+996\",\"ex\":\"700123456\",\"ptrn\":\"312(?:58$_bf_$d|973)$_bf_$d{3}|(?:2(?:0[0-35]|2$_bf_$d)|5[0-24-7]$_bf_$d|7(?:[07]$_bf_$d|55)|880|99[05-9])$_bf_$d{6}\"},{\"i\":\"KH\",\"lbl\":\"Cambodia\",\"img\":\"kh.png\",\"code\":\"+855\",\"ex\":\"91234567\",\"ptrn\":\"(?:(?:1[28]|3[18]|9[67])$_bf_$d|6[016-9]|7(?:[07-9]|[16]$_bf_$d)|8(?:[013-79]|8$_bf_$d))$_bf_$d{6}|(?:1$_bf_$d|9[0-57-9])$_bf_$d{6}|(?:2[3-6]|3[2-6]|4[2-4]|[5-7][2-5])48$_bf_$d{5}\"},{\"i\":\"KI\",\"lbl\":\"Kiribati\",\"img\":\"ki.png\",\"code\":\"+686\",\"ex\":\"72001234\",\"ptrn\":\"(?:63$_bf_$d{3}|73(?:0[0-5]$_bf_$d|140))$_bf_$d{3}|[67]200[01]$_bf_$d{3}\"},{\"i\":\"KM\",\"lbl\":\"Comoros (the)\",\"img\":\"km.png\",\"code\":\"+269\",\"ex\":\"3212345\",\"ptrn\":\"[34]$_bf_$d{6}\"},{\"i\":\"KP\",\"lbl\":\"Korea (the Democratic People's Republic of)\",\"img\":\"kp.png\",\"code\":\"+850\",\"ex\":\"1921234567\",\"ptrn\":\"19[1-3]$_bf_$d{7}\"},{\"i\":\"KR\",\"lbl\":\"Korea (the Republic of)\",\"img\":\"kr.png\",\"code\":\"+82\",\"ex\":\"1020000000\",\"ptrn\":\"1(?:05(?:[0-8]$_bf_$d|9[0-6])|22[13]$_bf_$d)$_bf_$d{4,5}|1(?:0[1-46-9]|[16-9]$_bf_$d|2[013-9])$_bf_$d{6,7}\"},{\"i\":\"KW\",\"lbl\":\"Kuwait\",\"img\":\"kw.png\",\"code\":\"+965\",\"ex\":\"50012345\",\"ptrn\":\"(?:5(?:2(?:22|5[25])|7(?:55|77)|88[58])|6(?:222|333|444|70[013-9]|888|93[039])|9(?:11[01]|3(?:00|33)|500))$_bf_$d{4}|(?:5(?:[05]$_bf_$d|1[0-7]|6[56])|6(?:0[034679]|5[015-9]|6$_bf_$d|7[67]|9[069])|9(?:0[09]|22|[4679]$_bf_$d|55|8[057-9]))$_bf_$d{5}\"},{\"i\":\"KZ\",\"lbl\":\"Kazakhstan\",\"img\":\"kz.png\",\"code\":\"+7\",\"ex\":\"7710009998\",\"ptrn\":\"7(?:0[0-25-8]|47|6[0-4]|7[15-8]|85)$_bf_$d{7}\"},{\"i\":\"RU\",\"lbl\":\"Russian Federation (the)\",\"img\":\"ru.png\",\"code\":\"+7\",\"ex\":\"9123456789\",\"ptrn\":\"9$_bf_$d{9}\"},{\"i\":\"LA\",\"lbl\":\"Lao People's Democratic Republic (the)\",\"img\":\"la.png\",\"code\":\"+856\",\"ex\":\"2023123456\",\"ptrn\":\"(?:20(?:[239]$_bf_$d|5[24-9]|7[6-8])|302$_bf_$d)$_bf_$d{6}\"},{\"i\":\"LB\",\"lbl\":\"Lebanon\",\"img\":\"lb.png\",\"code\":\"+961\",\"ex\":\"71123456\",\"ptrn\":\"793(?:[01]$_bf_$d|2[0-4])$_bf_$d{3}|(?:(?:3|81)$_bf_$d|7(?:[01]$_bf_$d|6[013-9]|8[89]|9[12]))$_bf_$d{5}\"},{\"i\":\"LI\",\"lbl\":\"Liechtenstein\",\"img\":\"li.png\",\"code\":\"+423\",\"ex\":\"660234567\",\"ptrn\":\"(?:6(?:4(?:69|[7-9]$_bf_$d)|5[0-4]$_bf_$d|6(?:[024]$_bf_$d|[17]0|3[7-9]))$_bf_$d|7(?:[37-9]$_bf_$d|42|56))$_bf_$d{4}\"},{\"i\":\"LK\",\"lbl\":\"Sri Lanka\",\"img\":\"lk.png\",\"code\":\"+94\",\"ex\":\"712345678\",\"ptrn\":\"7(?:[0-25-8]$_bf_$d|4[01])$_bf_$d{6}\"},{\"i\":\"LR\",\"lbl\":\"Liberia\",\"img\":\"lr.png\",\"code\":\"+231\",\"ex\":\"770123456\",\"ptrn\":\"(?:(?:330|555|(?:77|88)$_bf_$d)$_bf_$d|4[67])$_bf_$d{5}|[56]$_bf_$d{6}\"},{\"i\":\"LS\",\"lbl\":\"Lesotho\",\"img\":\"ls.png\",\"code\":\"+266\",\"ex\":\"50123456\",\"ptrn\":\"[56]$_bf_$d{7}\"},{\"i\":\"LT\",\"lbl\":\"Lithuania\",\"img\":\"lt.png\",\"code\":\"+370\",\"ex\":\"61234567\",\"ptrn\":\"6$_bf_$d{7}\"},{\"i\":\"LU\",\"lbl\":\"Luxembourg\",\"img\":\"lu.png\",\"code\":\"+352\",\"ex\":\"628123456\",\"ptrn\":\"6(?:[269][18]|5[1568]|7[189]|81)$_bf_$d{6}\"},{\"i\":\"LV\",\"lbl\":\"Latvia\",\"img\":\"lv.png\",\"code\":\"+371\",\"ex\":\"21234567\",\"ptrn\":\"2$_bf_$d{7}\"},{\"i\":\"LY\",\"lbl\":\"Libya\",\"img\":\"ly.png\",\"code\":\"+218\",\"ex\":\"912345678\",\"ptrn\":\"9[1-6]$_bf_$d{7}\"},{\"i\":\"MC\",\"lbl\":\"Monaco\",\"img\":\"mc.png\",\"code\":\"+377\",\"ex\":\"612345678\",\"ptrn\":\"4(?:[46]$_bf_$d|5[1-9])$_bf_$d{5}|(?:3|6$_bf_$d)$_bf_$d{7}\"},{\"i\":\"MD\",\"lbl\":\"Moldova (the Republic of)\",\"img\":\"md.png\",\"code\":\"+373\",\"ex\":\"62112345\",\"ptrn\":\"562$_bf_$d{5}|(?:6$_bf_$d|7[16-9])$_bf_$d{6}\"},{\"i\":\"ME\",\"lbl\":\"Montenegro\",\"img\":\"me.png\",\"code\":\"+382\",\"ex\":\"67622901\",\"ptrn\":\"6(?:[07-9]$_bf_$d|3[024]|6[0-25])$_bf_$d{5}\"},{\"i\":\"MG\",\"lbl\":\"Madagascar\",\"img\":\"mg.png\",\"code\":\"+261\",\"ex\":\"321234567\",\"ptrn\":\"3[2-489]$_bf_$d{7}\"},{\"i\":\"MH\",\"lbl\":\"Marshall Islands (the)\",\"img\":\"mh.png\",\"code\":\"+692\",\"ex\":\"2351234\",\"ptrn\":\"(?:(?:23|54)5|329|45[56])$_bf_$d{4}\"},{\"i\":\"MK\",\"lbl\":\"Republic of North Macedonia\",\"img\":\"mk.png\",\"code\":\"+389\",\"ex\":\"72345678\",\"ptrn\":\"7(?:3555|4(?:60$_bf_$d|747)|94(?:[01]$_bf_$d|2[0-4]))$_bf_$d{3}|7(?:[0-25-8]$_bf_$d|3[2-4]|42|9[23])$_bf_$d{5}\"},{\"i\":\"ML\",\"lbl\":\"Mali\",\"img\":\"ml.png\",\"code\":\"+223\",\"ex\":\"65012345\",\"ptrn\":\"2(?:0(?:01|79)|17$_bf_$d)$_bf_$d{4}|(?:5[01]|[679]$_bf_$d|8[239])$_bf_$d{6}\"},{\"i\":\"MM\",\"lbl\":\"Myanmar\",\"img\":\"mm.png\",\"code\":\"+95\",\"ex\":\"92123456\",\"ptrn\":\"(?:17[01]|9(?:2(?:[0-4]|[56]$_bf_$d$_bf_$d)|(?:3(?:[0-36]|4$_bf_$d)|(?:6$_bf_$d|8[89]|9[4-8])$_bf_$d|7(?:3|40|[5-9]$_bf_$d))$_bf_$d|4(?:(?:[0245]$_bf_$d|[1379])$_bf_$d|88)|5[0-6])$_bf_$d)$_bf_$d{4}|9[69]1$_bf_$d{6}|9(?:[68]$_bf_$d|9[089])$_bf_$d{5}\"},{\"i\":\"MN\",\"lbl\":\"Mongolia\",\"img\":\"mn.png\",\"code\":\"+976\",\"ex\":\"88123456\",\"ptrn\":\"(?:83[01]|920)$_bf_$d{5}|(?:5[05]|8[05689]|9[013-9])$_bf_$d{6}\"},{\"i\":\"MO\",\"lbl\":\"Macao\",\"img\":\"mo.png\",\"code\":\"+853\",\"ex\":\"66123456\",\"ptrn\":\"6800[0-79]$_bf_$d{3}|6(?:[235]$_bf_$d$_bf_$d|6(?:0[0-5]|[1-9]$_bf_$d)|8(?:0[1-9]|[14-8]$_bf_$d|2[5-9]|[39][0-4]))$_bf_$d{4}\"},{\"i\":\"MQ\",\"lbl\":\"Martinique\",\"img\":\"mq.png\",\"code\":\"+596\",\"ex\":\"696201234\",\"ptrn\":\"69(?:6(?:[0-46-9]$_bf_$d|5[0-6])|727)$_bf_$d{4}\"},{\"i\":\"MR\",\"lbl\":\"Mauritania\",\"img\":\"mr.png\",\"code\":\"+222\",\"ex\":\"22123456\",\"ptrn\":\"[2-4][0-46-9]$_bf_$d{6}\"},{\"i\":\"MT\",\"lbl\":\"Malta\",\"img\":\"mt.png\",\"code\":\"+356\",\"ex\":\"96961234\",\"ptrn\":\"(?:7(?:210|[79]$_bf_$d$_bf_$d)|9(?:[29]$_bf_$d$_bf_$d|69[67]|8(?:1[1-3]|89|97)))$_bf_$d{4}\"},{\"i\":\"MU\",\"lbl\":\"Mauritius\",\"img\":\"mu.png\",\"code\":\"+230\",\"ex\":\"52512345\",\"ptrn\":\"5(?:4(?:2[1-389]|7[1-9])|87[15-8])$_bf_$d{4}|5(?:2[5-9]|4[3-589]|[57]$_bf_$d|8[0-689]|9[0-8])$_bf_$d{5}\"},{\"i\":\"MV\",\"lbl\":\"Maldives\",\"img\":\"mv.png\",\"code\":\"+960\",\"ex\":\"7712345\",\"ptrn\":\"46[46]$_bf_$d{4}|(?:7$_bf_$d|9[13-9])$_bf_$d{5}\"},{\"i\":\"MW\",\"lbl\":\"Malawi\",\"img\":\"mw.png\",\"code\":\"+265\",\"ex\":\"991234567\",\"ptrn\":\"111$_bf_$d{6}|(?:31|77|88|9[89])$_bf_$d{7}\"},{\"i\":\"MX\",\"lbl\":\"Mexico\",\"img\":\"mx.png\",\"code\":\"+52\",\"ex\":\"12221234567\",\"ptrn\":\"6571$_bf_$d{6}|(?:1(?:2(?:2[1-9]|3[1-35-8]|4[13-9]|7[1-689]|8[1-578]|9[467])|3(?:1[1-79]|[2458][1-9]|3$_bf_$d|7[1-8]|9[1-5])|4(?:1[1-57-9]|[24-7][1-9]|3[1-8]|8[1-35-9]|9[2-689])|5(?:[56]$_bf_$d|88|9[1-79])|6(?:1[2-68]|[2-4][1-9]|5[1-3689]|6[1-57-9]|7[1-7]|8[67]|9[4-8])|7(?:[1-467][1-9]|5[13-9]|8[1-69]|9[17])|8(?:1$_bf_$d|2[13-689]|3[1-6]|4[124-6]|6[1246-9]|7[1-378]|9[12479])|9(?:1[346-9]|2[1-4]|3[2-46-8]|5[1348]|[69][1-9]|7[12]|8[1-8]))|2(?:2[1-9]|3[1-35-8]|4[13-9]|7[1-689]|8[1-578]|9[467])|3(?:1[1-79]|[2458][1-9]|3$_bf_$d|7[1-8]|9[1-5])|4(?:1[1-57-9]|[25-7][1-9]|3[1-8]|4$_bf_$d|8[1-35-9]|9[2-689])|5(?:[56]$_bf_$d|88|9[1-79])|6(?:1[2-68]|[2-4][1-9]|5[1-3689]|6[1-57-9]|7[1-7]|8[67]|9[4-8])|7(?:[1-467][1-9]|5[13-9]|8[1-69]|9[17])|8(?:1$_bf_$d|2[13-689]|3[1-6]|4[124-6]|6[1246-9]|7[1-378]|9[12479])|9(?:1[346-9]|2[1-4]|3[2-46-8]|5[1348]|6[1-9]|7[12]|8[1-8]|9$_bf_$d))$_bf_$d{7}\"},{\"i\":\"MY\",\"lbl\":\"Malaysia\",\"img\":\"my.png\",\"code\":\"+60\",\"ex\":\"123456789\",\"ptrn\":\"1(?:1888[69]|4400|8(?:47|8[27])[0-4])$_bf_$d{4}|1(?:0(?:[23568]$_bf_$d|4[0-6]|7[016-9]|9[0-8])|1(?:[1-5]$_bf_$d$_bf_$d|6(?:0[5-9]|[1-9]$_bf_$d)|7(?:[0134]$_bf_$d|2[1-9]|5[0-6]))|(?:(?:[269]|59)$_bf_$d|[37][1-9]|4[235-9])$_bf_$d|8(?:1[23]|[236]$_bf_$d|4[06]|5[7-9]|7[016-9]|8[01]|9[0-8]))$_bf_$d{5}\"},{\"i\":\"MZ\",\"lbl\":\"Mozambique\",\"img\":\"mz.png\",\"code\":\"+258\",\"ex\":\"821234567\",\"ptrn\":\"8[2-79]$_bf_$d{7}\"},{\"i\":\"NA\",\"lbl\":\"Namibia\",\"img\":\"na.png\",\"code\":\"+264\",\"ex\":\"811234567\",\"ptrn\":\"(?:60|8[1245])$_bf_$d{7}\"},{\"i\":\"NC\",\"lbl\":\"New Caledonia\",\"img\":\"nc.png\",\"code\":\"+687\",\"ex\":\"751234\",\"ptrn\":\"(?:5[0-4]|[79]$_bf_$d|8[0-79])$_bf_$d{4}\"},{\"i\":\"NE\",\"lbl\":\"Niger (the)\",\"img\":\"ne.png\",\"code\":\"+227\",\"ex\":\"93123456\",\"ptrn\":\"(?:23|7[04]|[89]$_bf_$d)$_bf_$d{6}\"},{\"i\":\"NF\",\"lbl\":\"Norfolk Island\",\"img\":\"nf.png\",\"code\":\"+672\",\"ex\":\"381234\",\"ptrn\":\"(?:14|3[58])$_bf_$d{4}\"},{\"i\":\"NG\",\"lbl\":\"Nigeria\",\"img\":\"ng.png\",\"code\":\"+234\",\"ex\":\"8021234567\",\"ptrn\":\"(?:702[0-24-9]|8(?:01|19)[01])$_bf_$d{6}|(?:70[13-689]|8(?:0[2-9]|1[0-8])|9(?:0[1-9]|1[2356]))$_bf_$d{7}\"},{\"i\":\"NI\",\"lbl\":\"Nicaragua\",\"img\":\"ni.png\",\"code\":\"+505\",\"ex\":\"81234567\",\"ptrn\":\"(?:5(?:5[0-7]|[78]$_bf_$d)|6(?:20|3[035]|4[045]|5[05]|77|8[1-9]|9[059])|(?:7[5-8]|8$_bf_$d)$_bf_$d)$_bf_$d{5}\"},{\"i\":\"NL\",\"lbl\":\"Netherlands (the)\",\"img\":\"nl.png\",\"code\":\"+31\",\"ex\":\"612345678\",\"ptrn\":\"6[1-58]$_bf_$d{7}\"},{\"i\":\"NO\",\"lbl\":\"Norway\",\"img\":\"no.png\",\"code\":\"+47\",\"ex\":\"40612345\",\"ptrn\":\"(?:4[015-8]|59|9$_bf_$d)$_bf_$d{6}\"},{\"i\":\"SJ\",\"lbl\":\"Svalbard and Jan Mayen\",\"img\":\"sj.png\",\"code\":\"+47\",\"ex\":\"41234567\",\"ptrn\":\"(?:4[015-8]|59|9$_bf_$d)$_bf_$d{6}\"},{\"i\":\"NP\",\"lbl\":\"Nepal\",\"img\":\"np.png\",\"code\":\"+977\",\"ex\":\"9841234567\",\"ptrn\":\"9(?:6[0-3]|7[245]|8[0-24-68])$_bf_$d{7}\"},{\"i\":\"NR\",\"lbl\":\"Nauru\",\"img\":\"nr.png\",\"code\":\"+674\",\"ex\":\"5551234\",\"ptrn\":\"(?:55[3-9]|666|8$_bf_$d$_bf_$d)$_bf_$d{4}\"},{\"i\":\"NU\",\"lbl\":\"Niue\",\"img\":\"nu.png\",\"code\":\"+683\",\"ex\":\"8884012\",\"ptrn\":\"888[4-9]$_bf_$d{3}\"},{\"i\":\"NZ\",\"lbl\":\"New Zealand\",\"img\":\"nz.png\",\"code\":\"+64\",\"ex\":\"211234567\",\"ptrn\":\"2[0-27-9]$_bf_$d{7,8}|21$_bf_$d{6}\"},{\"i\":\"OM\",\"lbl\":\"Oman\",\"img\":\"om.png\",\"code\":\"+968\",\"ex\":\"92123456\",\"ptrn\":\"1505$_bf_$d{4}|(?:7(?:[1289]$_bf_$d|70)|9(?:0[1-9]|[1-9]$_bf_$d))$_bf_$d{5}\"},{\"i\":\"PA\",\"lbl\":\"Panama\",\"img\":\"pa.png\",\"code\":\"+507\",\"ex\":\"61234567\",\"ptrn\":\"(?:1[16]1|21[89]|6(?:[02-9]$_bf_$d|1[0-8])$_bf_$d|8(?:1[01]|7[23]))$_bf_$d{4}\"},{\"i\":\"PE\",\"lbl\":\"Peru\",\"img\":\"pe.png\",\"code\":\"+51\",\"ex\":\"912345678\",\"ptrn\":\"9$_bf_$d{8}\"},{\"i\":\"PF\",\"lbl\":\"French Polynesia\",\"img\":\"pf.png\",\"code\":\"+689\",\"ex\":\"87123456\",\"ptrn\":\"8[7-9]$_bf_$d{6}\"},{\"i\":\"PG\",\"lbl\":\"Papua New Guinea\",\"img\":\"pg.png\",\"code\":\"+675\",\"ex\":\"70123456\",\"ptrn\":\"(?:7$_bf_$d|8[18])$_bf_$d{6}\"},{\"i\":\"PH\",\"lbl\":\"Philippines (the)\",\"img\":\"ph.png\",\"code\":\"+63\",\"ex\":\"9051234567\",\"ptrn\":\"(?:8(?:1[37]|9[5-8])|9(?:0[5-9]|1[0-24-9]|[2357]$_bf_$d|4[2-9]|6[0-35-9]|8[135-9]|9[1-9]))$_bf_$d{7}\"},{\"i\":\"PK\",\"lbl\":\"Pakistan\",\"img\":\"pk.png\",\"code\":\"+92\",\"ex\":\"3012345678\",\"ptrn\":\"3(?:[014]$_bf_$d|2[0-5]|3[0-7]|55|64)$_bf_$d{7}\"},{\"i\":\"PL\",\"lbl\":\"Poland\",\"img\":\"pl.png\",\"code\":\"+48\",\"ex\":\"512345678\",\"ptrn\":\"211(?:1$_bf_$d|3[1-5])$_bf_$d{4}|(?:45|5[0137]|6[069]|7[2389]|88)$_bf_$d{7}\"},{\"i\":\"PM\",\"lbl\":\"Saint Pierre and Miquelon\",\"img\":\"pm.png\",\"code\":\"+508\",\"ex\":\"551234\",\"ptrn\":\"(?:4[02-4]|5[05])$_bf_$d{4}\"},{\"i\":\"PS\",\"lbl\":\"Palestine, State of\",\"img\":\"ps.png\",\"code\":\"+970\",\"ex\":\"599123456\",\"ptrn\":\"5[69]$_bf_$d{7}\"},{\"i\":\"PT\",\"lbl\":\"Portugal\",\"img\":\"pt.png\",\"code\":\"+351\",\"ex\":\"912345678\",\"ptrn\":\"6[0356]92(?:30|9$_bf_$d)$_bf_$d{3}|(?:(?:16|6[0356])93|9(?:[1-36]$_bf_$d$_bf_$d|480))$_bf_$d{5}\"},{\"i\":\"PW\",\"lbl\":\"Palau\",\"img\":\"pw.png\",\"code\":\"+680\",\"ex\":\"6201234\",\"ptrn\":\"(?:46[0-5]|6[2-4689]0)$_bf_$d{4}|(?:45|77|88)$_bf_$d{5}\"},{\"i\":\"PY\",\"lbl\":\"Paraguay\",\"img\":\"py.png\",\"code\":\"+595\",\"ex\":\"961456789\",\"ptrn\":\"9(?:51|6[129]|[78][1-6]|9[1-5])$_bf_$d{6}\"},{\"i\":\"QA\",\"lbl\":\"Qatar\",\"img\":\"qa.png\",\"code\":\"+974\",\"ex\":\"33123456\",\"ptrn\":\"(?:28|[35-7]$_bf_$d)$_bf_$d{6}\"},{\"i\":\"RE\",\"lbl\":\"R\\u00e9union\",\"img\":\"re.png\",\"code\":\"+262\",\"ex\":\"692123456\",\"ptrn\":\"(?:69(?:2$_bf_$d$_bf_$d|3(?:[06][0-46]|1[013]|2[0-2]|3[0-39]|4$_bf_$d|5[0-5]|7[0-27]|8[0-8]|9[0-479]))|9769$_bf_$d)$_bf_$d{4}\"},{\"i\":\"YT\",\"lbl\":\"Mayotte\",\"img\":\"yt.png\",\"code\":\"+262\",\"ex\":\"639012345\",\"ptrn\":\"639(?:0[0-79]|1[019]|[267]$_bf_$d|3[09]|40|5[05-9]|9[04-79])$_bf_$d{4}\"},{\"i\":\"RO\",\"lbl\":\"Romania\",\"img\":\"ro.png\",\"code\":\"+40\",\"ex\":\"712034567\",\"ptrn\":\"7020$_bf_$d{5}|7(?:0[013-9]|1[0-2]|[2-7]$_bf_$d|8[03-8]|9[019])$_bf_$d{6}\"},{\"i\":\"RS\",\"lbl\":\"Serbia\",\"img\":\"rs.png\",\"code\":\"+381\",\"ex\":\"601234567\",\"ptrn\":\"6(?:[0-689]|7$_bf_$d)$_bf_$d{6,7}\"},{\"i\":\"RW\",\"lbl\":\"Rwanda\",\"img\":\"rw.png\",\"code\":\"+250\",\"ex\":\"720123456\",\"ptrn\":\"7[2389]$_bf_$d{7}\"},{\"i\":\"SA\",\"lbl\":\"Saudi Arabia\",\"img\":\"sa.png\",\"code\":\"+966\",\"ex\":\"512345678\",\"ptrn\":\"579[01]$_bf_$d{5}|5(?:[013-689]$_bf_$d|7[0-36-8])$_bf_$d{6}\"},{\"i\":\"SB\",\"lbl\":\"Solomon Islands\",\"img\":\"sb.png\",\"code\":\"+677\",\"ex\":\"7421234\",\"ptrn\":\"48$_bf_$d{3}|(?:(?:7[1-9]|8[4-9])$_bf_$d|9(?:1[2-9]|2[013-9]|3[0-2]|[46]$_bf_$d|5[0-46-9]|7[0-689]|8[0-79]|9[0-8]))$_bf_$d{4}\"},{\"i\":\"SC\",\"lbl\":\"Seychelles\",\"img\":\"sc.png\",\"code\":\"+248\",\"ex\":\"2510123\",\"ptrn\":\"2[5-8]$_bf_$d{5}\"},{\"i\":\"SD\",\"lbl\":\"Sudan (the)\",\"img\":\"sd.png\",\"code\":\"+249\",\"ex\":\"911231234\",\"ptrn\":\"(?:1[0-2]|9[0-3569])$_bf_$d{7}\"},{\"i\":\"SE\",\"lbl\":\"Sweden\",\"img\":\"se.png\",\"code\":\"+46\",\"ex\":\"701234567\",\"ptrn\":\"7[02369]$_bf_$d{7}\"},{\"i\":\"SG\",\"lbl\":\"Singapore\",\"img\":\"sg.png\",\"code\":\"+65\",\"ex\":\"81234567\",\"ptrn\":\"(?:8(?:0(?:[13]$_bf_$d|2[013-9]|4[0-35-7])|[1-8]$_bf_$d$_bf_$d|9(?:[0-4]$_bf_$d|5[0-2]))|9[0-8]$_bf_$d$_bf_$d)$_bf_$d{4}\"},{\"i\":\"SH\",\"lbl\":\"Saint Helena, Ascension and Tristan da Cunha\",\"img\":\"sh.png\",\"code\":\"+290\",\"ex\":\"51234\",\"ptrn\":\"[56]$_bf_$d{4}\"},{\"i\":\"SI\",\"lbl\":\"Slovenia\",\"img\":\"si.png\",\"code\":\"+386\",\"ex\":\"31234567\",\"ptrn\":\"65(?:1$_bf_$d|55|[67]0)$_bf_$d{4}|(?:[37][01]|4[0139]|51|6[489])$_bf_$d{6}\"},{\"i\":\"SK\",\"lbl\":\"Slovakia\",\"img\":\"sk.png\",\"code\":\"+421\",\"ex\":\"912123456\",\"ptrn\":\"909[1-9]$_bf_$d{5}|9(?:0[1-8]|1[0-24-9]|4[03-57-9]|5$_bf_$d)$_bf_$d{6}\"},{\"i\":\"SL\",\"lbl\":\"Sierra Leone\",\"img\":\"sl.png\",\"code\":\"+232\",\"ex\":\"25123456\",\"ptrn\":\"(?:25|3[0-5]|66|7[3-9]|8[08]|9[09])$_bf_$d{6}\"},{\"i\":\"SM\",\"lbl\":\"San Marino\",\"img\":\"sm.png\",\"code\":\"+378\",\"ex\":\"66661212\",\"ptrn\":\"6[16]$_bf_$d{6}\"},{\"i\":\"SN\",\"lbl\":\"Senegal\",\"img\":\"sn.png\",\"code\":\"+221\",\"ex\":\"701234567\",\"ptrn\":\"75(?:01|[38]3)$_bf_$d{5}|7(?:[06-8]$_bf_$d|21|5[4-7]|90)$_bf_$d{6}\"},{\"i\":\"SO\",\"lbl\":\"Somalia\",\"img\":\"so.png\",\"code\":\"+252\",\"ex\":\"71123456\",\"ptrn\":\"(?:(?:15|(?:3[59]|4[89]|79|8[08])$_bf_$d|6(?:0[5-7]|[1-9]$_bf_$d)|9(?:0$_bf_$d|[2-9]))$_bf_$d|2(?:4$_bf_$d|8))$_bf_$d{5}|(?:6$_bf_$d|7[1-9])$_bf_$d{6}\"},{\"i\":\"SR\",\"lbl\":\"Suriname\",\"img\":\"sr.png\",\"code\":\"+597\",\"ex\":\"7412345\",\"ptrn\":\"(?:7[124-7]|8[124-9])$_bf_$d{5}\"},{\"i\":\"SS\",\"lbl\":\"South Sudan\",\"img\":\"ss.png\",\"code\":\"+211\",\"ex\":\"977123456\",\"ptrn\":\"(?:12|9[1257-9])$_bf_$d{7}\"},{\"i\":\"ST\",\"lbl\":\"Sao Tome and Principe\",\"img\":\"st.png\",\"code\":\"+239\",\"ex\":\"9812345\",\"ptrn\":\"900[5-9]$_bf_$d{3}|9(?:0[1-9]|[89]$_bf_$d)$_bf_$d{4}\"},{\"i\":\"SV\",\"lbl\":\"El Salvador\",\"img\":\"sv.png\",\"code\":\"+503\",\"ex\":\"70123456\",\"ptrn\":\"66(?:[02-9]$_bf_$d$_bf_$d|1(?:[02-9]$_bf_$d|16))$_bf_$d{3}|(?:6[0-57-9]|7$_bf_$d)$_bf_$d{6}\"},{\"i\":\"SY\",\"lbl\":\"Syrian Arab Republic\",\"img\":\"sy.png\",\"code\":\"+963\",\"ex\":\"944567890\",\"ptrn\":\"9(?:22|[3-689]$_bf_$d)$_bf_$d{6}\"},{\"i\":\"SZ\",\"lbl\":\"Eswatini\",\"img\":\"sz.png\",\"code\":\"+268\",\"ex\":\"76123456\",\"ptrn\":\"7[6-9]$_bf_$d{6}\"},{\"i\":\"TD\",\"lbl\":\"Chad\",\"img\":\"td.png\",\"code\":\"+235\",\"ex\":\"63012345\",\"ptrn\":\"(?:6[023568]|77|9$_bf_$d)$_bf_$d{6}\"},{\"i\":\"TG\",\"lbl\":\"Togo\",\"img\":\"tg.png\",\"code\":\"+228\",\"ex\":\"90112345\",\"ptrn\":\"(?:7[09]|9[0-36-9])$_bf_$d{6}\"},{\"i\":\"TH\",\"lbl\":\"Thailand\",\"img\":\"th.png\",\"code\":\"+66\",\"ex\":\"812345678\",\"ptrn\":\"671[0-3]$_bf_$d{5}|(?:14|6[1-6]|[89]$_bf_$d)$_bf_$d{7}\"},{\"i\":\"TJ\",\"lbl\":\"Tajikistan\",\"img\":\"tj.png\",\"code\":\"+992\",\"ex\":\"917123456\",\"ptrn\":\"41[18]$_bf_$d{6}|(?:[034]0|11|2[02]|5[05]|7[07]|8[08]|9$_bf_$d)$_bf_$d{7}\"},{\"i\":\"TK\",\"lbl\":\"Tokelau\",\"img\":\"tk.png\",\"code\":\"+690\",\"ex\":\"7290\",\"ptrn\":\"7[2-4]$_bf_$d{2,5}\"},{\"i\":\"TL\",\"lbl\":\"Timor-Leste\",\"img\":\"tl.png\",\"code\":\"+670\",\"ex\":\"77212345\",\"ptrn\":\"7[2-8]$_bf_$d{6}\"},{\"i\":\"TM\",\"lbl\":\"Turkmenistan\",\"img\":\"tm.png\",\"code\":\"+993\",\"ex\":\"66123456\",\"ptrn\":\"6$_bf_$d{7}\"},{\"i\":\"TN\",\"lbl\":\"Tunisia\",\"img\":\"tn.png\",\"code\":\"+216\",\"ex\":\"20123456\",\"ptrn\":\"3(?:001|[12]40)$_bf_$d{4}|(?:(?:[259]$_bf_$d|4[0-7])$_bf_$d|3(?:1[1-35]|6[0-4]|91))$_bf_$d{5}\"},{\"i\":\"TO\",\"lbl\":\"Tonga\",\"img\":\"to.png\",\"code\":\"+676\",\"ex\":\"7715123\",\"ptrn\":\"(?:55[4-6]|6(?:[09]$_bf_$d|3[02]|8[15-9])|(?:7$_bf_$d|8[46-9])$_bf_$d|999)$_bf_$d{4}\"},{\"i\":\"TR\",\"lbl\":\"Turkey\",\"img\":\"tr.png\",\"code\":\"+90\",\"ex\":\"5012345678\",\"ptrn\":\"56161$_bf_$d{5}|5(?:0[15-7]|1[06]|24|[34]$_bf_$d|5[1-59]|9[46])$_bf_$d{7}\"},{\"i\":\"TV\",\"lbl\":\"Tuvalu\",\"img\":\"tv.png\",\"code\":\"+688\",\"ex\":\"901234\",\"ptrn\":\"(?:7[01]$_bf_$d|90)$_bf_$d{4}\"},{\"i\":\"TW\",\"lbl\":\"Taiwan (Province of China)\",\"img\":\"tw.png\",\"code\":\"+886\",\"ex\":\"912345678\",\"ptrn\":\"(?:40001[0-2]|9[0-8]$_bf_$d{4})$_bf_$d{3}\"},{\"i\":\"TZ\",\"lbl\":\"Tanzania, United Republic of\",\"img\":\"tz.png\",\"code\":\"+255\",\"ex\":\"621234567\",\"ptrn\":\"77[2-9]$_bf_$d{6}|(?:6[1-9]|7[1-689])$_bf_$d{7}\"},{\"i\":\"UA\",\"lbl\":\"Ukraine\",\"img\":\"ua.png\",\"code\":\"+380\",\"ex\":\"501234567\",\"ptr\\u6781\":\"(?:50|6[36-8]|7[1-3]|9[1-9])$_bf_$d{7}\"},{\"i\":\"UG\",\"lbl\":\"Uganda\",\"img\":\"ug.png\",\"code\":\"+256\",\"ex\":\"712345678\",\"ptrn\":\"726[01]$_bf_$d{5}|7(?:[0157-9]$_bf_$d|20|36|[46][0-4])$_bf\\u6781$d{6}\"},{\"i\":\"UY\",\"lbl\":\"Uruguay\",\"img\":\"uy.png\",\"code\":\"+598\",\"ex\":\"94231234\",\"ptrn\":\"9[1-9]$_bf_$d{6}\"},{\"i\":\"UZ\",\"lbl\":\"Uzbekistan\",\"img\":\"uz.png\",\"code\":\"+998\",\"ex\":\"912345678\",\"ptrn\":\"(?:(?:33|88|9[0-57-9])$_bf_$d{3}|55(?:50[013]|90$_bf_$d)|6(?:1(?:2(?:2[01]|98)|35[0-4]|50$_bf_$d|61[23]|7(?:[01][017]|4$_bf_$d|55|9[5-9]))|2(?:(?:11|7$_bf_$d)$_bf_$d|2(?:[12]1|9[01379])|5(?:[126]$_bf_$d|3[0-4]))|5(?:19[01]|2(?:27|9[26])|(?:30|59|7$_bf_$d)$_bf_$d)|6(?:2(?:1[5-9]|2[0367]|38|41|52|60)|(?:3[79]|9[0-3])$_bf_$d|4(?:56|83)|7(?:[07]$_bf_$d|1[017]|3[07]|4[047]|5[057]|67|8[0178]|9[79]))|7(?:2(?:24|3[237]|4[5-9]|7[15-8])|5(?:7[12]|8[0589])|7(?:0$_bf_$d|[39][07])|9(?:0$_bf_$d|7[079]))|9(?:2(?:1[1267]|3[01]|5$_bf_$d|\\u67817[0-4])|(?:5[67]|7$_bf_$d)$_bf_$d|6(?:2[0-26]|8$_bf_$d)))|7(?:[07]$_bf_$d{3}|1(?:13[01]|6(?:0[47]|1[67]|66)|71[3-69]|98$_bf_$d)|2(?:2(?:2[79]|95)|3(?:2[5-9]|6[0-6])|57$_bf_$d|7(?:0$_bf_$d|1[17]|2[27]|3[37]|44|5[057]|66|88))|3(?:2(?:1[0-6]|21|3[469]|7[159])|(?:33|9[4-6])$_bf_$d|5(?:0[0-4]|5[579]|9$_bf_$d)|7(?:[0-3579]$_bf_$d|4[0467]|6[67]|8[078]))|4(?:2(?:29|5[0257]|6[0-7]|7[1-57])|5(?:1[0-4]|8$_bf_$d|9[5-9])|7(?:0$_bf_$d|1[024589]|2[0-27]|3[0137]|[46][07]|5[01]|7[5-9]|9[079])|9(?:7[015-9]|[89]$_bf_$d))|5(?:112|2(?:0$_bf_$d|2[29]|[49]4)|3[1568]$_bf_$d|52[6-9]|7(?:0[01578]|1[017]|[23]7|4[047]|[5-7]$_bf_$d|8[78]|9[079]))|6(?:2(?:2[1245]|4[2-4])|39$_bf_$d|41[179]|5(?:[349]$_bf_$d|5[0-2])|7(?:0[017]|[13]$_bf_$d|22|44|55|67|88))|9(?:22[128]|3(?:2[0-4]|7$_bf_$d)|57[02569]|7(?:2[05-9]|3[37]|4$_bf_$d|60|7[2579]|87|9[07]))))$_bf_$d{4}\"},{\"i\":\"VE\",\"lbl\":\"Venezuela (Bolivarian Republic of)\",\"img\":\"ve.png\",\"code\":\"+58\",\"ex\":\"4121234567\",\"ptrn\":\"4(?:1[24-8]|2[46])$_bf_$d{7}\"},{\"i\":\"VN\",\"lbl\":\"Viet Nam\",\"img\":\"vn.png\",\"code\":\"+84\",\"ex\":\"912345678\",\"ptrn\":\"(?:5(?:2[238]|59)|89[689]|99[013-9])$_bf_$d{6}|(?:3$_bf_$d|5[689]|7[06-9]|8[1-8]|9[0-8])$_bf_$d{7}\"},{\"i\":\"VU\",\"lbl\":\"Vanuatu\",\"img\":\"vu.png\",\"code\":\"+678\",\"ex\":\"5912345\",\"ptrn\":\"(?:[58]$_bf_$d|7[013-7])$_bf_$d{5}\"},{\"i\":\"WF\",\"lbl\":\"Wallis and Futuna\",\"img\":\"wf.png\",\"code\":\"+681\",\"ex\":\"821234\",\"ptrn\":\"(?:72|8[23])$_bf_$d{4}\"},{\"i\":\"WS\",\"lbl\":\"Samoa\",\"img\":\"ws.png\",\"code\":\"+685\",\"ex\":\"7212345\",\"ptrn\":\"(?:7[1-35-7]|8(?:[3-7]|9$_bf_$d{3}))$_bf_$d{5}\"},{\"i\":\"YE\",\"lbl\":\"Yemen\",\"img\":\"ye.png\",\"code\":\"+967\",\"ex\":\"712345678\",\"ptrn\":\"7[0137]$_bf_$d{7}\"},{\"i\":\"ZA\",\"lbl\":\"South Africa\",\"img\":\"za.png\",\"code\":\"+27\",\"ex\":\"711234567\",\"ptrn\":\"(?:1(?:3492[0-25]|4495[0235]|549(?:20|5[01]))|4[34]492[01])$_bf_$d{3}|8[1-4]$_bf_$d{3,7}|(?:2[27]|47|54)4950$_bf_$d{3}|(?:1(?:049[2-4]|9[12]$_bf_$d$_bf_$d)|(?:6$_bf_$d|7[0-46-9])$_bf_$d{3}|8(?:5$_bf_$d{3}|7(?:08[67]|158|28[5-9]|310)))$_bf_$d{4}|(?:1[6-8]|28|3[2-69]|4[025689]|5[36-8])4920$_bf_$d{3}|(?:12|[2-5]1)492$_bf_$d{4}\"},{\"i\":\"ZM\",\"lbl\":\"Zambia\",\"img\":\"zm.png\",\"code\":\"+260\",\"ex\":\"955123456\",\"ptrn\":\"(?:7[679]|9[5-8])$_bf_$d{7}\"},{\"i\":\"ZW\",\"lbl\":\"Zimbabwe\",\"img\":\"zw.png\",\"code\":\"+263\",\"ex\":\"712345678\",\"ptrn\":\"7(?:[178]$_bf_$d|3[1-9])$_bf_$d{6}\"}],\"valid\":{},\"err\":{\"invalid\":{\"dflt\":\"<p style=\\\"margin:0\\\">\\u8bf7\\u8f93\\u5165\\u6709\\u6548\\u7684\\u7535\\u8bdd\\u53f7\\u7801<\\\/p>\",\"show\":true}},\"customClasses\":{},\"customAttributes\":{},\"fieldName\":\"phone-number-1-6\"},\"b1-7\":{\"typ\":\"file-up\",\"lbl\":\"File Upload\",\"btnTxt\":\"Attach File\",\"valid\":{},\"prefixIcn\":\"https:\\\/\\\/wellspcba.com\\\/wp-content\\\/plugins\\\/bit-form\\\/assets\\\/..\\\/static\\\/file-upload\\\/paperclip.svg\",\"err\":{\"maxSize\":{\"dflt\":\"<p style=\\\"margin:0\\\">\\u8d85\\u51fa\\u6700\\u5927\\u6587\\u4ef6\\u5927\\u5c0f\\u3002(\\u6700\\u5927\\uff1a1024MB)<\\\/p>\",\"show\":true},\"minFile\":{\"dflt\":\"<p style=\\\"margin:0\\\">\\u81f3\\u5c11\\u9700\\u8981 0 \\u4e2a\\u6587\\u4ef6<\\\/p>\",\"show\":true},\"maxFile\":{\"dflt\":\"<p style=\\\"margin:0\\\">\\u6700\\u591a\\u5141\\u8bb8 0 \\u4e2a\\u6587\\u4ef6<\\\/p>\",\"show\":true}},\"customClasses\":{},\"customAttributes\":{},\"config\":{\"multiple\":true,\"allowMaxSize\":true,\"showMaxSize\":true,\"maxSize\":\"1024\",\"sizeUnit\":\"MB\",\"isItTotalMax\":false,\"showSelectStatus\":true,\"fileSelectStatus\":\"No File Selected\",\"allowedFileType\":\"\",\"showFileList\":true,\"fileExistMsg\":\"A file allready exist\",\"showFilePreview\":true,\"showFileSize\":true,\"duplicateAllow\":false,\"accept\":\"\",\"minFile\":0,\"maxFile\":0},\"fieldName\":\"file-up-1-7\"},\"b1-8\":{\"typ\":\"textarea\",\"lbl\":\"Company\",\"ph\":\"\\u5360\\u4f4d\\u7b26...\",\"phHide\":true,\"valid\":{\"req\":true,\"reqShow\":true,\"reqPos\":\"after\"},\"err\":{\"req\":{\"dflt\":\"<p style=\\\"margin:0\\\">\\u6b64\\u5b57\\u6bb5\\u4e3a\\u5fc5\\u586b\\u9879<\\\/p>\",\"show\":true}},\"customClasses\":{},\"customAttributes\":{},\"fieldName\":\"textarea-1-8\"}},\"buttons\":\"\",\"fieldsKey\":{\"b1-1\":\"b1-1\",\"b1-2\":\"b1-2\",\"b1-3\":\"b1-3\",\"b1-5\":\"b1-5\",\"b1-6\":\"b1-6\",\"b1-7\":\"b1-7\",\"b1-8\":\"b1-8\"},\"file\":[\"b1-7\"],\"configs\":{\"bf_separator\":\"__bf__\"},\"formId\":1,\"appID\":\"bitforms_1\",\"GCLID\":false,\"assetUrl\":\"https:\\\/\\\/wellspcba.com\\\/wp-content\\\/plugins\\\/bit-form\\\/assets\",\"onfieldCondition\":false,\"smartTags\":{\"_bf_current_time\":\"2026-06-04 21:53:34\",\"_bf_admin_email\":\"249118627@qq.com\",\"_bf_date_default\":\"2026-06-05\",\"_bf_date.m\\\/d\\\/y\":\"06\\\/05\\\/26\",\"_bf_date.d\\\/m\\\/y\":\"05\\\/06\\\/26\",\"_bf_date.y\\\/m\\\/d\":\"26\\\/06\\\/05\",\"_bf_date.Y-m-d\":\"2026-06-05\",\"_bf_date.d-M, Y\":\"05-Juin, 2026\",\"_bf_time\":\"05:53\",\"_bf_weekday\":\"vendredi\",\"_bf_http_referer_url\":\"\",\"_bf_ip_address\":\"216.73.216.103\",\"_bf_browser_name\":\"Bot\",\"_bf_operating_system\":\"\",\"_bf_random_digit\":\"6a21f3deb492b\",\"_bf_user_id\":\"0\",\"_bf_user_first_name\":\" \",\"_bf_user_last_name\":\" \",\"_bf_user_display_name\":\" \",\"_bf_user_nice_name\":\" \",\"_bf_user_login_name\":\" \",\"_bf_user_email\":\" \",\"_bf_user_url\":\" \",\"_bf_current_user_role\":\" \",\"_bf_author_id\":\" \",\"_bf_author_display\":\" \",\"_bf_author_email\":\" \",\"_bf_site_title\":\"WELLS SMT&amp;PCBA\",\"_bf_site_description\":\"One stop PCBA OEM service\",\"_bf_site_url\":\"https:\\\/\\\/wellspcba.com\\\/fr\",\"_bf_wp_local_codes\":\"fr-FR\",\"_bf_separator\":\"__bf__\",\"_bf_post_id\":\"\",\"_bf_post_name\":\"\",\"_bf_post_title\":\"\",\"_bf_post_date\":\"\",\"_bf_post_modified_date\":\"\",\"_bf_post_url\":\"\",\"_bf_is_user_logged_in\":\"logged_out\",\"_bf_entry_id\":\"\",\"_bf_back_view\":\"https:\\\/\\\/wellspcba.com\\\/fr\\\/wp-json\\\/wp\\\/v2\\\/posts\\\/1658\"},\"paymentCallbackUrl\":\"https:\\\/\\\/wellspcba.com\\\/fr\\\/wp-json\\\/bitform\\\/v1\\\/payments\\\/razorpay\",\"gRecaptchaSiteKey\":null,\"gRecaptchaVersion\":null,\"turnstileSiteKey\":null,\"hCaptchaSiteKey\":null}\n        };\n      }<\/script>","protected":false},"excerpt":{"rendered":"<p>A coupon test station in PCB manufacturing is a dedicated setup within a fabrication facility where non-functional board sections \u2014 called test coupons \u2014 are evaluated using precision instruments to verify that the manufacturing process has met specified electrical, mechanical, and reliability requirements. It is the point in the production workflow where objective, quantifiable data [&hellip;]<\/p>","protected":false},"author":2,"featured_media":1659,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[1],"tags":[],"class_list":["post-1658","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog"],"acf":[],"_links":{"self":[{"href":"https:\/\/wellspcba.com\/fr\/wp-json\/wp\/v2\/posts\/1658","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wellspcba.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wellspcba.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wellspcba.com\/fr\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/wellspcba.com\/fr\/wp-json\/wp\/v2\/comments?post=1658"}],"version-history":[{"count":1,"href":"https:\/\/wellspcba.com\/fr\/wp-json\/wp\/v2\/posts\/1658\/revisions"}],"predecessor-version":[{"id":1664,"href":"https:\/\/wellspcba.com\/fr\/wp-json\/wp\/v2\/posts\/1658\/revisions\/1664"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/wellspcba.com\/fr\/wp-json\/wp\/v2\/media\/1659"}],"wp:attachment":[{"href":"https:\/\/wellspcba.com\/fr\/wp-json\/wp\/v2\/media?parent=1658"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wellspcba.com\/fr\/wp-json\/wp\/v2\/categories?post=1658"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wellspcba.com\/fr\/wp-json\/wp\/v2\/tags?post=1658"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}